Skil 0761 - Инструкция по эксплуатации - Страница 6

6

High-pressure washer 

0760

INTRODUCTION

•  This tool has been designed for cleaning areas and 

objects outside the house, vehicles and boats

•  This tool is intended for domestic use only and is not 

designed to operate with water from sources other than a 

watertap

•  This tool is not intended for professional use

•  Read this instruction manual carefully before use 

and save it for future reference 

3

•  Pay special attention to the safety instructions and 

warnings; failure to follow these may result in 

serious injury

•  Check whether the packaging contains all parts as 

illustrated in drawing 

2

•  When parts are missing or damaged, please contact your 

dealer

TECHNICAL DATA 

1

Working pressure (P)  

7 MPa

Maximum working pressure (Pmax)  

10 MPa

Inlet pressure  

0 - 0,6 MPa

TOOL ELEMENTS 

2

A

  Trigger lock

B

 Trigger

C

  Inlet connector

D

  Water inlet

E

  Water filter

F

  Mains switch

G

  Spraying nozzle

H

  Detergent bottle

J

  Detergent nozzle

K

  Spray lance

L

  Hand gun

M

  Cleaning needle

N

  Storage rail (

screws not supplied

)

P

  Storage strap (2)

Q

  High-pressure hose

R

  Water outlet

S

  Ventilation slots

T

  Connection for storage straps

SAFETY

GENERAL

•  Use the tool and its accessories in accordance with this 

instruction manual and in the manner intended for the 

tool; use of the tool for operations, different from those 

normally expected to be performed by the tool, could 

result in a hazardous situation

• 

Never draw in solvent-containing liquids, undiluted 

acids or solvents (e.g. petrol, paint thinners, heating 

oil)

; these liquids produce a highly flammable, explosive 

and toxic sprayed vapour and they also corrode the tool 

components

•  Only use the tool when the ambient temperature is 

between 0°C and 40°C

•  Start working only when tool and operating 

equipment are in perfect condition and safe to 

operate

•  Be aware of the kickback forces that occur when starting 

the high-pressure washer; hold hand gun and spray lance 

firmly and take a secure stance

•  Never clamp the trigger in position during operation

•  Never direct the water jet towards other people, 

animals, live electrical equipment or the tool itself 

4

•  Never leave the tool unattended while the motor is 

running

•  Do not operate the tool in potentially explosive locations

•  Always switch off tool, disconnect plug from power 

source, and ensure there is no water pressure in 

tool and hand gun before adjusting, cleaning or 

changing accessories

PERSONAL SAFETY

•  This tool is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction 

concerning use of the tool by a person responsible for 

their safety

•  Ensure that children do not play with the tool

•  Wear suitable protective clothing to protect against 

splashing water

•  Do not use the tool with other persons in the vicinity 

unless they wear protective clothing

•  Do not spray materials containing asbestos and other 

materials which contain substances which are hazardous 

to your health

•  Only clean tyres/tyre valves from a minimum distance of 

30 cm to prevent damaging them (damaged vehicle tyres 

may lead to fatal accidents)

•  Do not direct the water jet against yourself or others 

in order to clean clothes or footwear

WATER SUPPLY

•  Only use the high-pressure hose and coupling 

supplied with the tool

•  Replace a damaged high-pressure hose immediately 

(with identical specifications)

•  Do not kink or drive a motor vehicle over the high-

pressure hose

•  Do not expose the high-pressure hose to sharp edges or 

corners

•  Ensure that all connecting hoses have properly sealed 

joints

•  Be aware that the sprayed water generated by the 

tool is not drinkable

•  According to the applicable regulations, the tool must 

never be used on the drinking water net without a system 

separator 

5

; use a suitable system separator as per EN 

12729 type BA

ELECTRICAL SAFETY

•  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the tool (tools with 

a rating of 230V or 240V can also be connected to a 

220V supply)

•  Connect the tool via a fault current (FI) circuit breaker 

with a triggering current of 30 mA maximum