Мойки высокого давления Ryobi RPW110B 110 бар 5133003747 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
English
|
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
TROUBLESHOOTING
Problem
Possible causes
Solution
Product refuses
to start
Product not plugged in
Plug in product.
Defective socket
Try another socket.
Defective extension cable
Try without the extension cable.
Fluctuating
pressure
Pump sucking air
Check that hoses and connections are air tight.
Valves dirty, worn out or
stuck
Bring the product to an authorized service centre for
service or repair.
Pump seals worn out
Bring the product to an authorized service centre for
service or repair.
Product stops
Fuse has blown
Bring the product to an authorized service centre for
service or repair.
Incorrect mains voltage
Check that the mains voltage corresponds to
speci
fi
cation on the model tag.
Thermal sensor activated
Leave the cleaner for 15 minutes to cool down.
Nozzle partially blocked
Clean the nozzle.
Product pulsating Air in inlet hose/pump
Allow the product to run with open trigger until
regular working pressure resumes.
Inadequate supply of mains
water
Check that the water supply corresponds to the
speci
fi
cations required (see model tag). Avoid using
long, thin hoses.
Nozzle partially blocked
Clean the nozzle.
Water
fi
lter blocked
Clean the
fi
lter.
Hose kinked
Straighten out hose.
Product often
starts and stops
by itself
Pump/spray handle is leaking Bring the product to an authorized service centre for
service or repair.
Product starts, but
no water comes
out
Pump/hoses or accessory
frozen
Wait for pump/hoses or accessory to thaw.
No water supply
Connect the water inlet port to a water supply.
Water
fi
lter blocked
Clean the
fi
lter.
Nozzle blocked
Clean the nozzle.
No detergent
Nozzle adjusted to high
pressure
Adjust to low pressure.
Tank is empty.
Fill the tank.
