Nilfisk MC 7P-195/1280 POSEIDON 7-67 FA 107145848 - Инструкция по эксплуатации - Страница 19

19

1)

 Options / model variants

Original instructions

MC 5M, MC 6P, MC 7P

5.2.3  Buildings and Equipment

These are merely several examples of cleaning tasks that can be solved by a pressure washer in as-
sociation with accessories and detergents. Each cleaning task is different. Please consult your local 
dealer or Nil

fi

 sk-ALTO representative in order to discuss the best solution for your own cleaning tasks.

Task

Accessories

Method

General surfaces

Metallic equipment

Detergents

Foam injectors 
Standard lance
Curved lances
Tank cleaning
head

Intensive
J25 Multi
Combi Aktive
Alkafoam 

Disinfectant
DES 3000

1.  Apply thick foam over the surfaces to be cleaned. 

Apply on dry surfaces. Apply from top to bottom on 
vertical surfaces. Let the foam act for up to 10 - 30 
minutes for the optimal effect.

2.  Proceed with cleaning using the high pressure 

lance.  Use applicable accessories. Use high 
pressure to dislodge large amounts of incrusted 
dirt or grime. Use lower pressure and high water 
volume in order to rapidly flush away loose dirt and 
rinse surfaces.

3.  Apply DES 3000 disinfectant once the surfaces are 

perfectly clean.

Areas covered by amounts of loose dirt, such as 
animal remains in slaughterhouses, can be removed 
by using high water flow to flush away the dirt to 
evacuation pits or drains.
Tank cleaning heads can be used to clean barrels, 
vats, mixing tanks etc. Cleaning heads may be 
hydraulically or electrically powered and give the 
possibility for automatic cleaning without a constant 
user.

Rusted or 
damages surfaces 
prior to treatment

Wet Sandblasting 
equipment

1.  Connect the sandblasting lance to the pressure 

washer and place the suction tube in the sand.

2.  Always wear protective equipment during 

sandblasting.

3.  Spray the surfaces to be treated with the mix of 

water and sand. Rust, paint etc will be stripped off.