Nilfisk MC-4M-140/620 EU POSEIDON 4-28 107146395 - Инструкция по эксплуатации - Страница 9

*) 

Optional accessories / Option depending on model

Original instruction

9

Quick reference guide

This high pressure washer has been designed for 
professional use typically in following cleaning ap-
plications:
floor/wall, auto/truck, buildings/constructions, con-
tainer/barrel and craftsman use.

The pictorial quick reference guide

The pictorial quick reference guide is designed for 
helping you when starting up, operating and storing 
the unit. The guide is subdivided into 5 sections.

A

Before starting
DO READ SAFETY INSTRUCTIONS BEFORE USE!
Operating elements:

1.  Inlet water connection
2.  Nipple for high pressure hose
3. Lifting 

handle

4. Cabinet
5. Cable 

release

6. Oil 

sight

7. On/off 

switch

8.  Handle hose reel*)
9. Hose 

reel  *)

10.  Lock hose reel*)
11. Lance
12.  Holder for lance
13.  Ergo 2000 spray handle
14. Child lock
15.  Holder for spray lance*)
16.  Holder with a 2½ l canister *)
17. Cabinet lock
18.  Foam Sprayer *)
19.  Flexo Power lance*)
20.  Placement for lances 
21. 4-in-1 lance*)
22.  Cable end fixation 
23. Foot kick
24.  Holder for Foam Sprayer/Canister lid*)
25.  Hose hook *)   

Assembling the unit:

1.0 

Mount handle on hose reel

1.1 

Mount filter and Gardena coupling

1.2 

Mount the seal and 3/8” nipple on high 
pressure outlet

1.3 

Connect hoses  (water and high pressure 
hose)

1.4 

Mount the lance

1.5 

Connect the electrical cable to mains. 

B

Switching on the unit

1.0 

Check oil level  (see E1.2)

1.1 

Open water tap

1.2 

Switch on the High Pressure Washer

1.3 

Open child lock at spray handle

1.4 

Activate spray handle

C

Control/operation
Using cleaning agents:

1.0 

Check / clean hole in suction limiter at Foam

 Sprayer
1.1 

Mount Foam Sprayer at canister 

1.2 

Set spray angle horizontal/vertical

1.3 

Activate spray handle.

Nozzle selection at 4-in-1 lance (XT models):

2.0 

Turn nozzle head and choose nozzle

Adjust pressure at FlexoPower lance (Standard 
models):

3.0 

Turn the blue part of the nozzle head Min./  
max.

Cable unwind and storage:

4.0 

Turn the cable hook for cable release /  

storage

4.1 

Fixate cable end at hose hook after use

Hose reel unwind:

5.0 

Release hose reel lock, and pull out hose 

5.1 

During use, cable and hose MUST be  

completely unwound

D

After using the unit

1.0 

Switch off the High Pressure Washer

1.1 

Disconnect from mains 

1.2 

Turn off the water 

1.3 

Release pressure at spray handle

1.4 

Set child lock 

1.5 

Rewind hose & lock hose reel 

1.6 

Place spray handle and lance in holders 

E

Maintenance

1.0 

Unlock cabinet opening cabin locks (use    
coin or screwdriver)  

1.1 Remove 

cabinet

1.2 

Check / top up with oil to max (SAE 80W-90)

1.3 

Oil max v.s. pump type MC 3C (NA3) or MC  
4M (NA4)