Lavor LANDER 3000 8.601.0202C - Инструкция по эксплуатации - Страница 14

14

S

S

fig. 1

II. DETERGENT SUCTION

Insert the CHEMICAL nozzle into the lance (fig. 2A). 

Plunge suction hose with filter into detergent tank 

(fig. 2B). When you start the machine, the mixing of 

the detergent with the water is automatic at the wa-

ter passage.

fig. 2B

fig. 2A

•

CAUTION

: make use only of liquid detergent, 

do not absolutely use acid or too much alkaline 

products. We suggest you to make use of our 

products, which have been studied for the use 

with washer machines.

III. USE OF THE LANCE

The high-pressure cleaner is supplied with different 

nozzle types:

- Low-pressure nozzle (fig. 3A, “CHEMICAL”): for op-

erating with detergent or cleaning with negligible 

pressure,

- 0° nozzle: straight stream (fig. 3B) for particularly 

stubborn accumulation of grime,

- 15° nozzle: flat spray (fig. 3C) for dirt accumulation 

over a large surface,

Optional  - 25° nozzle: flat spray (fig. 3D) for dirt ac-

cumulation over a large surface,

Optional - 40° nozzle: flat spray (fig. 3E) for dirt ac-

cumulation over a large surface.

fig. 3A

fig. 3B

fig. 3C

fig. 3D

fig. 3E

Optional:

IV. APPLIANCES PROVIDED WITH THERMAL 

VALVE

This device enables the machine’s by-pass opera-

tion through automatic water discharge whenever 

it reaches a temperature of nearly 60°C and cooling 

working components.

•

CAUTION

: appliances that are not provided 

with this disposal must not operate for more 

than 2 minutes with released gun. Recycled wa-

ter raises its temperature remarkably causing 

great damages to the pump.

MONTAGE
Study the series of photos shown below 

(pag. 3 , fig. C)

OPERATING INSTRUCTIONS

•

CAUTION! Do not run the engine with a high 

or low oil level as this can cause engine dam-

age. If you have further questions regarding the 

engine, please refer to the engine’s operating 

manual included with the unit.

•

CAUTION! The engine is not provide with oil. It 

is necessary to fil the carter before starting the 

engine.

•

CAUTION! Before starting the pump, check the 

oil level in the pump.

•

CAUTION! If it is the first time that you use the 

machine or if you do not operate the machine 

for a long period, it is necessary to connect, for 

some minutes, the suction hose, in order to let 

possible impurities go out, so that the nozzle 

gun will not become clogged.

•

CAUTION! Fill gas tank with unleaded gasoline. 

Do not use leaded gasoline.

I. STARTING UP
WATER SUPPLY

Water supply connection - Additional safety in-

formation

 WARNING: (symbol) machine not suitable 

for connection to the potable water mains.

•

CAUTION

: 

 Water that has flown through back-

flow preventers is considered to be nonpotable.