Мойки высокого давления Karcher HDS 801 B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
– 9
Danger
Risk of burns injury on account of acid!
Wear protective glasses and protective
gloves.
Procedure:
According to statutory requirements, only
tested and approv approved boiler decrust-
ing agents may be used.
–
RM 100 (Order No. 6.287-008) dis-
solves chalk and simple compounds of
chalk and detergents residues.
–
RM 101 (Order No. 6.287-013) dis-
solves the deposits that cannot be dis-
solved using RM 100.
Fill a 20 litre container with 15 l water.
Add one litre of boiler decrusting agent.
Connect the water hose directly to the
pump and hang in the other free end
into the container.
Insert the connected spray pipe without
nozzle into the container.
Start the engine according to the oper-
ating instructions of the engine manu-
facturer.
Open the hand-spray gun and do not close
it during the decalcification process.
Set the temperature regulator to work-
ing temperature of 40 °C.
Let the appliance run till the working
temperature is reached.
Switch off the appliance and let it stand for
20 minutes. The hand-spray gun must re-
main opened.
Then pump out the machine until empty.
Note:
As an anti-corrosion measure and for
neutralising the acid residue, we recom-
mend that you finally pump an alkaline so-
lution through the machine (for e.g. RM 81)
via the detergent tank.
–
Fuel tank empty
Refill.
–
Liquid softener tank is empty, due to
technical reasons a remainder stays in
the tank.
Refill.
–
Electrodes in the tank are dirty
Clean the electrodes.
Follow operating instructions of the engine
manufacturer!
–
Fuel tank empty.
Refill.
–
Spark plug is dirty.
Spark plug is defective.
Clean or replace the spark plug.
–
No oil in the motor.
Check oil level of the engine.
Replenish oil.
Troubleshooting
Fuel indicator lamp glows
Indicator lamp for 'softener liquid
empty' is blinking
Motor does not run
23
EN
