Мойки высокого давления Karcher HD 1040 B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
– 7
Allow the appliance to cool down; then
restart it. Refer section "Interrupting op-
eration".
–
Operating speed of the engine is too
low
Check operating speed of the engine
(refer to technical data).
–
Nozzle is set to "CHEM"
Set nozzle to "High pressure".
–
Nozzle is blocked/ washed out
Clean/ replace nozzle.
–
Sieve in the water connection is dirty
Clean sieve.
–
Air within the system
Appliance ventilation:
–
Amount of water supply is too low.
Check water supply level (refer to tech-
nical data).
–
Pipe inlets to pump are leaky or blocked
Check all inlet pipes to the pump.
–
Pump leaky
Note
3 drops/minute are allowed.
With stronger leak, have device
checked by customer service.
–
Inlet pipes to the pump are leaky.
Check all inlet pipes to the pump.
–
Air within the system
Appliance ventilation:
–
Nozzle is set to "High pressure"
Set nozzle to "CHEM".
–
Detergent suction hose with filter is
leaky or blocked
Check/ clean detergent suction hose
with filter.
–
Backflow valve in the connection of the
detergent suction hose is jammed
Clean/ replace backflow valve in the
connection of the detergent suction
hose.
–
Detergent dosing valve is closed or
leaky/ blocked
Open or check/clean detergent dosing
valve.
If malfunction can not be fixed, the de-
vice must be checked by customer serv-
ice.
Device is not building up pressure
Device leaks, water drips from the
bottom of the device
Pump is vibrating
Detergent is not getting sucked in
18
EN
