Karcher HD 10/16-4 Cage Ex 1.353-762 - Инструкция по эксплуатации - Страница 15

English

 15

The appliance was developped specifically 
for working in areas with risks of explosion 
(zone 1 and zone 2).
Use this high pressure cleaner exclusively 
for: 
– to clean machines, vehicles, buildings, 

containers and tools, which are exclu-
sively permitted for cleaning using a  
high-pressure cleaner.

– with accessories and spare parts ap-

proved by Kärcher. 

– It is wrong and therefore prohibited is 

the cleaning of humans and animals. 
There is a high risk of injury due to the 
high pressure jet.

– It is wrong and therefore prohibited is 

cleaning loose parts. These can get 
thrown off due to the high pressure jet 
and can cause damage to persons or 
other parts of the plant.

– The appliance should only be operated 

with water.

– If water is used for cleaning, protect the 

appliance from frost to prevent damag-
es by freezing water.

High-pressure jets can be dan-
gerous if improperly used. The 
jet may not be directed at per-

sons, animals, live electrical equipment or 
at the appliance itself.

– Please follow the national rules and 

regulations for fuel spray jets of the re-
spective country.

– Please follow the national rules and 

regulations for accident prevention of 
the respective country. Fuel spray jets 
must be tested regularly and the results 
of these tests must be documented in 
writing.

1 The pump must only be used in zones 

that correspond to the ignition protec-
tion type on the typeplate.

2 The pump must be grounded electro-

statically. The ground must be conduc-
tive.

3 The pump must only be operated after 

its been ventilated.

4 Never draw in fluids containing solvents 

or undiluted acids and solvents! This in-
cludes petrol, paint thinner and heating 
oil. The spray mist thus generated is 
highly inflammable, explosive and poi-
sonous. Do not use acetone, undiluted 
acids and solvents as they are aggres-
sive towards the materials from which 
the appliance is made.

5 The infeed temperature of the cleaning 

liquid water with detergents must not 
must not exceed 50 °C.

6 The pump must be checked regularly 

for flawless condition and function after 
an appropriate operating period (among 
others, bearings for wear, pump for 
leaks). If applicable, a repair needs to 
be conducted.

7 The pump must only be used with 

cleaning liquids, whose affect on the 
materials is not damaging.

8 Hoses must be conductive (electrostat-

ically) (resistance R < 10

6

 Ohm).

Use only original parts.

9 Please follow the national rules and 

regulations of the respective country.

Safety devices serve to protect the user 
and must not be rendered inoperational or 
their functions bypassed.

Proper use

Symbols on the machine

Safety instructions

Special conditions in the Ex area

Safety Devices