IPC Portotecnica G 149-CP I 1508 A 94297 IDAF - Инструкция по эксплуатации - Страница 14

14

rarily,  turn  it  off  by  using  the  omnipolar 

switch or by unplugging the plug from 

the socket.

IMPORTANT

 : 

Use only original Spare 

Parts.

CLOTHING AND  EQUIPMENT

Always wear anti-slip 

sole footwear.
Wear protective goggles 

or visor and safety wear.

It is advisable to wear work overalls in 

order to reduce the risk of injury in the 

event of accidental contact with a high 

pressure jet.

FIELDS  OF APPLICATION

The high pressure water cleaner has 

been developed for washing vehicles, 

machines, containers, façades, stables 

and for removing rust without generating 

dust or sparks.

The high pressure water cleaner with 

single-phase motor is designed for use 

in the home environment.

During cleaning, ensure that no dange-

rous substances of the object to be cle-

aned are dispersed into the environment 

(such as asbestos, oil for example).

Carefully follow disposal instructions.

Do not treat concrete-asbestos surfaces 

with high pressure jets. As it may cause 

the detachment of dangerous asbestos 

fibres  as  well  as  dirt,  detrimental  to  the 

lungs.

The risk exists particularly after the drying 

of a surface treated with a water jet or 

steam.

Do not clean delicate components made 

of rubber, fabric or similar materials with 

a multi-directional jet.

When cleaning with a high pressure, flat 

jet, keep the nozzle at a minimum distan-

ce of 15 cm.

STARTING UP, OPERATIONAL 

ADVICE

The trigger of the spray gun 

must function smoothly and 

return to initial position, after 

release.

Check the functional conditions of the ap-

pliance before the start of each operation.

The mains cable and the plug, the high 

pressure pipe with spraying device and 

the safety devices are particularly im-

portant.Keep children and animals clear 

when the appliance is operating.

Do not ever wash the ap-

pliance or other electrical 

appliances with a water 

jet.

Short circuit danger!

Warning! Explosion or 

deflagration hazards! 

Do not spray and/or use 

inflammable substances.

Check that there is sufficient air circulation 

in the motor ventilation zone.

Do not cover the appliance, ensure that 

there is sufficient motor ventilation.

Position the high pressure cleaner as far 

away as possible from the object to be 

sprayed.

Do not damage the mains attachment 

cable by treading on it, squashing or pul-

ling it, etc.Do not detach the plug from the 

socket by pulling the connection wire, but 

pull out the plug.

Make sure hands are dry before touching 

the plug and the connection cable.
Hold the spraying device with both hands 

in order to properly absorb the reaction 

force  and  the  additional  torque  in  the 

case of spraying device with an inclined 

spraying pipe. Always assume a safe and 

secure position.

Before undertaking any 

work on the appliance 

always detachthe plug 

from the power socket.