Bort BHR-2200 - Инструкция по эксплуатации - Страница 7

7

ENGLISH

GB

HIGH PRESSURE CLEANER

INTRODUCTION

The high pressure cleaner is quick and efficient for 
cleaning vehicles, machines, boats, buildings, etc ., by 
the removal of stubborn dirt using clean water and 
chemical detergents .
When using chemical detergents, only use biodegrada-
ble types . Only clean vehicle engines in areas in which 
suitable oil traps are installed .

TECHNICAL SPECIFICATIONS (FIG. 1)

Power consumption

2 000 W

Max pressure

160 bar

Working pressure

130 bar

Maximum output

8 l/min /

480 l/min

Auto-sucking function

+

Automatic blocking

+

Hose

8 m

Power cord length

5 m

Voltage / Current frequency

220 V / 50 Hz

Product weight

10,5 kg

PRODUCT ELEMENTS (FIG. 2)

1 .  Switch;
2 .  Gun Holder;
3 .  Unit;
4 .  Water Inlet Adapter;
5 .  Cord Hook;
6 .  Foam Canon Hook;
7 .  Pressure Hose;
8 .  Gun Handle;
9 .  Gun Lance;
10 .  Foam Canon;
11 .  Quick Connector . 

THE COMPLETE SET INCLUDES:

•  Adjustable spray nozzle;
•  Pressure hose;
•  Foam generator;
•  Filter .

Product Life:

The service life of the product is 5 years .

Production date:

Is indicated on the packaging of the goods .

Shelf life:

Shelf life is not limited (subject to storage conditions) .

Storage conditions:

Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of 
not more than 80% .

Transportation:

It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any 
type of equipment that works on the principle of packing 
clamping .

SAFETY INSTRUCTIONS

When using electric machines always observe the safe-
ty regulations applicable in your country to reduce the 
risk of fire, electric shock and personal injury . Read the 
following safety instructions and also the enclosed 
safety instructions .
Keep these instructions in a safe place!

Electrical safety

Always check if your mains voltage corresponds with 
the value on the type plate .
When replacing old cables or plugs: throw away old 
cables or plugs immediately as soon as new ones have 
replaced these . It is dangerous to put the plug of a 
loose cable into the socket outlet .
When using extension cables:
Only use an approved extension cable that is suitable 
for the machine’s power . The cores must have a diame-
ter of at least 1 .5 mm2 . When the extension cable is on 
a reel, unroll the cable in its entirety .
All electrical connections e .g . extension cable, must 
be of an approved waterproof type for outdoor use 
and marked accordingly . Extension cables must be 
threecore, one of which is EARTH .

Switch off the machine immediately in case of:

1 . Malfunction in the mains plug, power cable or dam-
aging of cable .
2 . Broken switch .
3 . Smoke or stench of scorched insulation .

Specific safety rules

•  Do not disconnect the plug by pulling on the elec-
trical cable .
•  If you are too far from the object you wish to clean, 
do not move the cleaner nearer by pulling on the high 
pressure hose; use the handle provided .
•  Do not obstruct the ventilation grilles during opera-