Philips 216V6LSB2/62 (10) - Инструкция по эксплуатации - Страница 21

19

6. Сведения о соответствии стандартам

Information for U.K. only

WARNING - THIS APPLIANCE MUST BE 
EARTHED.

Important:

This apparatus is supplied with an approved 
moulded 13A plug. To change a fuse in this type 
of plug proceed as follows:

1.  Remove fuse cover and fuse.
2.  Fit new fuse which should be a BS 1362 

5A,A.S.T.A. or BSI approved type.

3.  Retit the fuse cover.

If the fitted plug is not suitable for your socket 
outlets, it should be cut off and an appropriate 
3-pin plug fitted in its place.

If the mains plug contains a fuse, this should 
have a value of 5A. If a plug without a fuse is 
used, the fuse at the distribution board should 
not be greater than 5A.

NOTE: 

The severed plug must be destroyed 

to avoid a possible shock hazard 
should it be inser ted into a 13A socket 
elsewhere.

(A)

(B)

How to connect a plug

The wires in the mains lead are coloured in 
accordance with the following code:

BLUE -“NEUTRAL”(“N”)

BROWN -“LIVE”(“L”)

GREEN&YELLOW -“EARTH”(“E”)

1.  The GREEN&YELLOW wire must be 

connected to the terminal in the plug 
which is marked with the letter "E" or by 
the Ear th symbol or coloured GREEN or 
GREEN&YELLOW.

2.  The BLUE wire must be connected to the 

terminal which is marked with the letter 
"N" or coloured BLACK.

3.  The BROWN wire must be connected 

to the terminal which is marked with the 
letter "L" or coloured RED.

Before replacing the plug cover, make cer tain 
that the cord grip is clamped over the sheath of 
the lead - not simply over the three wires.

-