VITEK VT-2451 BK - Инструкция по эксплуатации - Страница 12

12

 ENGLISH

switch  on.  When  the  temperature  in  the  oven 
cavity  decreases,  the  cooking  process  will 
resume and last until the preset cooking pro-
gram is finished. 

2. 

If  during  the  cooking  program  operation  the 
temperature  didn’t  reach  the  preset  value, 
you  will  hear  sound  signals  and  the  symbols 
E02  will  appear  on  the  display  (8).  Press  the 
“Stop/Cancel”  button  (13)  to  stop  the  cook-
ing process.

3. 

The symbols E03 on the display (8) mean that 
the  temperature  sensor  works  improperly, 
switch  the  oven  off  and  apply  to  any  autho-
rized  service  center  at  the  contact  address 
list given in the warranty certificate and on the 
website www.vitek.ru.

CLEANING AND CARE
Clean the unit regularly. Absence of due care 
may  may  affect  the  unit  operation,  cause 
wear  of  the  unit  surfaces  and  create  a  haz-
ard to the user.

 •

Before cleaning, switch the unit off and unplug it.

 •

Provide  that  moisture  does  not  get  on  the 
unit’s control panel, clean it with a soft, slightly 
damp cloth and then wipe it dry.

 •

Keep  the  oven  cavity  clean.  When  food  rem-
nants  or  splatters  stick  to  the  unit  walls, 
remove them with a damp tissue.

 •

If  the  cavity  is  too  dirty,  you  may  use  a  soft 
detergent.

 •

Do  not  use  abrasives  and  metal  brushes  to 
clean  inner  and  outer  surfaces  of  the  oven. 
Provide  that  no  water  or  detergent  gets  into 
the  air  and  steam  outlets  located  on  the  unit 
body and lid.

 •

Do not use ammonia-based detergents.

 •

Wipe  the  unit’s  outer  surface  with  a  clean, 
slightly damp cloth.

 •

Keep  the  oven  door  clean.  Provide  that  no 
crumbs and food remnants accumulate bet-
ween  the  door  and  the  front  panel  of  the 
oven  as  it  prevents  the  door  from  normal 
closing.

 •

Regularly remove dust and dirt from the venti-
lation openings on the oven body, which serve 
for cooling air intake.

 •

Regularly take out and clean the glass rotary 
bottom plate and the roller support, wipe the 
bottom of the oven cavity.

 •

Wash  the  glass  bottom  plate  and  the  roller 
support  in  warm  water  with  a  neutral  deter-
gent. You can wash these parts in a dishwash-
ing machine.

 •

Do  not  immerse  the  heated  glass  rotary  bot-
tom plate into cold water: the glass plate can 
splinter  due  to  extreme  temperature  differ-
ence.

TROUBLES AND TROUBLESHOOTING

The unit creates interference 
in the reception of TV and radio 
signals

During operation of the unit, interference in the reception of 
TV and radio signals can appear. Similar interference appears 
during operation of small electrical appliances such as a mixer,  
a vacuum cleaner and a hairdryer. It is normal.

Dim lighting

Oven cavity lighting can be low when low microwave power level 
has been set. It is normal.

Steam accumulation on the 
door, hot air output from the 
ventilation openings.

During cooking, steam can come out from the products. Most 
of the steam comes out through the ventilation openings, but 
some part of it can accumulate on the inner side of the door.  
It is normal.

The microwave oven has been 
switched on without food inside.

Switching the unit on without food for a short time does not 
cause its damage. Always make sure that there are food 
products in the unit before switching it on

Troubleshooting

Failure

Possible reason

Solution

The unit cannot be 
switched on

The power cord plug is not 
properly inserted in the socket

Pull the plug out of the socket. After 10 
seconds insert the plug into the socket again

Malfunction of the electric socket

Try to connect another unit to the same 
socket

IM VT-2451.indd   12

30.11.2016   14:29:49