VITEK VT-1666 - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

21. Auto cooking mode indication
22. Timer  indication
23. Standby  mode  indication
24. Digital information/current time indica-

tion

25. Grille  mode  indication
26. Current time indication
27. Lockout mode indication
28. Power level indication
29. Product weight indication
30. 60%, 40% and 20% power operation in-

dication

31. Combination mode 2 indication
32. 100% and 80% power operation indica-

tion

33. Combination mode 1 indication
34. Microwave mode indication
35. Defrost mode indication

TIPS ON GROUNDING OF THE 
MICROWAVE OVEN

The unit should be securely grounded. In 
case of any short circuit grounding reduces 
risk of getting electric shock, because cur-
rent will pass via a ground wire. A power 
cord with a grounding wire and the plug 
with a grounding contact are used in the 
unit. The plug should be connected to the 
outlet that should always have a grounding 
contact.

WARNING:

 usage of the plug with a 

grounding contact connected with the out-
let without grounding can lead to the risk of 
electric shock. Consult a qualified electri-
cian, if you do not understand the instruc-
tions on grounding or if you are not sure 
that the unit is securely grounded.
To prevent tangling of the power cable the 
unit is equipped with a short power cable.
If you need an extension cord use only a 3-
wired extension cord with a grounding con-
tact on the plug and the socket.
-  Marking of the cord wire section of the 

microwave oven and on the cable of the 
extension cord should match.

-  There should be a grounding wire in the 

extension cord.

-  The power cable of the extension cord 

should not hang over the edges of the 
table, where children can pull it and it 
should not be in a passing way.

SET TING

•  Before switching on the unit, make sure 

that the voltage in your home socket cor-
responds to the voltage specified on the 
unit.

•  Make sure that all packing materials are 

removed from the oven chamber.

•  Do not remove a light-gray mica base in-

side the chamber in the place of micro-
waves output (4), as it serves to protect 
the magnetron. 

 AT TENTION!

 Make sure that the unit 

does not have damages such as: bent or 
broken door, broken or loose hinges and 
latches, dimples inside the oven or on 
the door. W ith the existence of any of the 
damages, usage of the unit is prohibited.

•  Set the unit on the flat stable surface that 

will bear its weight and max. weight of the 
products, which will be cooked in it. Place 
the unit out of the reach of children.

•  Do not place the unit in places with high 

moisture and temperature, and near in-
flammable objects.

•  Proper ventilation is needed for normal 

operation of the unit. Set the oven leaving 
at least 7-8 cm of space behind and on 
the sides of the oven and 30 cm of space 
above the oven. 

  Do not block ventilation openings on the 

microwave oven case. Do not remove 
supporting legs from the bottom of the 
oven. 

•  Do not use the unit without the glass tray 

and the roller ring.

•  Make sure that the power cable does not 

have any damages and does not pass 
below the unit or through any hot or sharp 
objects.

Microwave oven assembly

Remove the package and the accessories 

1666.indd   6

1666.indd   6

24.06.2008   12:46:29

24.06.2008   12:46:29