Kuppersberg HMW 634 B - Инструкция по эксплуатации - Страница 37

37

ENGLISH

TECHNICAL PASSPORT

Microwave

Building in

Â

Do not hold or carry the appli-

ance by the door handle. The door han-

dle cannot hold the weight of the appli-

ance and may break off.

1.  Carefully push the microwave 

into the box, making sure that it is in 

the centre.

2. Open the door and fasten the mi-

crowave with the screws that were sup-

plied.

Â

Fully insert the appliance and 

centre it.

Â

Do not kink the connecting cable.

Â

Screw the appliance into place.

Important information with 

plug

Electrical connection

The  appliance  is  fitted  with  a  plug 

and must only be connected to a prop-

erly installed earthed socket.

Only  a  qualified  electrician  who 

takes the approriate regulations into 

account may install the socket or re-

place the connecting cable. If the plug 

is no longer accessible following instal-

lation, an all-pole isolating switch must 

be present on the installation side with 

a contact gap of at least 3 mm. Contact 

protection must be ensured by the in-

stallation.

Fuse protection: see instructions for 

use-technical data.

lmportant information without 
plug

The  appliance  is  designed  to  Ье 

permanently  installed  with  а  three-pin 
power cord and may only Ье connected 
Ьу а licensed expert in accordance with 

the connection diagram.

Only  а  qualified  electrician  who 

takes the relevant regulations into ac-
count may replace the power cord.

Do not use multiple plugs, power 

strips or extensions. Overloading causes 

а risk of fire. 11 the connection is по lon

-

ger accessiЫe following installation, an 
all-pin  isolating  switch  with  а  contact 
gap of at least 3 mm must bе provided.