Микроволновые печи Elenberg MS-2006M - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

18
INSTALLATION
Turntable Installation
Turntable Installation
a. Never place the glass tray upside down. The
glass tray should never be restricted.
b. All food and containers of food are always
placed on the glass tray for cooking.
c. If glass tray cracks or breaks, contact your
nearest authorized service center.
Countertop Installation
Countertop Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Cabinet: Remove any protective
fi
lm found on
the microwave oven cabinet surface. Do not
remove the light brown Mica cover that is attached to the oven cavity to pro-
tect the magnetron.
INSTALLATION
INSTALLATION
1. Select a level surface that provide enough open space for the intake and/or
outlet vents.
A minimum clearance of 7.5cm is required between the oven and any adjacent
walls. One side must be open.
(1) Leave a minimum clearance of
30cm above the oven.
(2) Do not remove the legs from the
bottom of the oven.
(3) Blocking the intake and/or outlet
openings can damage the oven.
(4) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or
TV reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the
frequency is the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing
appliance. If installed near or over a heat source, the oven could be damaged
and the warranty would be void.
