BRAYER BR2502 - Инструкция по эксплуатации - Страница 17

17

EN

•  Keep the microwave oven process chamber clean. 

If food pieces or leaks remained on the oven walls, 

remove them with a damp cloth.

•  If the process chamber is very dirty, you may use a 

mild detergent.

•  Do not use abrasive detergents for cleaning outer 

and inner surfaces of the oven.

•  Make sure that no water or detergent gets into 

openings on the body lid, intended for outlet of air 

and steam.

•  Keep the oven door clean, regularly clean the oven 

door from two sides.

•  Do not allow accumulation of crumbs and food pieces 

between the door and the front panel, it may prevent 

the oven door from normal closing.

•  Regularly take out and clean the glass tray and 

its roller support; wipe the bottom of the process 

chamber.

•  Wash the glass tray and the roller support in warm 

water with a neutral detergent, then rinse and dry.

•  The roller support and the glass tray may be washed 

in a dishwasher.

•  Do not immerse the heated glass tray into cold water: 

the glass tray may crack due to extreme temperature 

difference.

•  To remove foreign smells in the oven process 

chamber, mix juice and peel of one lemon in a cup 

of water, pour into a microwave-safe soup plate or 

container and place on the tray, switch the oven on at 

the medium power and set the operation time from 5 

to 8 minutes. 

•  Open the door and clean the oven process chamber 

thoroughly.

STORAGE

•  Before taking the microwave oven away for long-term 

storage, clean the process chamber and the outer 

surface of the body of the oven.

•  Keep the microwave oven in a dry cool place out of 

reach of children and disabled persons.

DELIVERY SET

1.  Microwave oven – 1 pc.

2.  Glass tray support – 1 pc.

3.  Roller support – 1 pc.

4.  Glass tray – 1 pc.

5.  Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

•  The microwave oven is placed in class B, group 2. 

•  The group 2 equipment: group 2 includes all the ISM 

radio-frequency equipment, where radio-frequency 

energy in the frequency range from 9 kHz to 400 

GHz is only deliberately generated and used locally, 

in the form of electromagnetic emission, inductive 

and/or capacity coupling, for material processing, 

for the purposes of control/analysis or for transfer of 

electromagnetic energy.