Микроволновые печи Gorenje MO20S4BC - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

- 44 -
1.2
Press
Start
button once to confirm.
1.3
Turn knob, and set
Micro Power
cooking time for 3 minutes.
3:00
2
Set P20 for 9min
2.1
Press
Micro Power
button to choose P20
P20
2.2
Press
Start
button once to confirm.
2.3
Turn knob to set cooking time, set the cooking time is 9 minutes
9:00
3
Start cooking by pressing
Start
button.
CAUTION!
a. When microwave power cooking is finished, microwave oven will begin grill operation automatically.
b. Max 4 sequences can be set per time, repeat the steps.
13. CHILD LOCK FUNCTION
This feature is primarily intended to prevent children from using the microwave oven without adult guidance or
to protect the control panel when cleaning. When in child safety lock mode, all buttons will be locked.
Set child lock: Hold Pause/Cancel button about 3 seconds.
Cancel child lock: Hold Pause/Cancel button about 3 seconds.
14. ECO ENERGY SAVING MODE
When the standby status display is on, press the eco button once, the display will go out, the microwave oven
will enter the energy-saving mode, in the energy-saving mode, press any key, or open or close the door, the
display will re-light up and exit the energy-saving mode.
15. BUZZER SOUNDS ON AND OFF
When the buzzer sound is on in the standby state, press and hold eco button for 3 seconds, the display
shows b-oF, the buzzer sound is turned off, and after 1 second, it returns to the standby state to display the
clock;
When the buzzer sound is off in the standby state, press and hold eco button for 3 seconds, the display
shows b-on, the buzzer sounds on, and returns to the standby state after 1 second to display the clock.













