VITEK VT-6411 - Инструкция по эксплуатации - Страница 7

Метеостанции VITEK VT-6411 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 44
Загружаем инструкцию
background image

 ENGLISH

7

weather  conditions,  in  this  case  we  rec-
ommend  trusting  the  local  weather  fore-
cast;

–  the  symbol  “Sunny”  means  sunny 

weather at night as well.

Comfort level dislpaying

–  The comfort level is shown on the display 

with the symbols (3).
«DRY»  –  dry:  temperature  within  any 
range, humidity is less than 40%;
«GOOD»  –  comfortable:  temperature  is 
within +20  °С, +28  °С, humidity is 40-70%;
«HUMI»  –  humid:  temperature  within  any 
range, humidity is more than 70%;
“no  indication”:  temperature  is  beyond 
+20  °С, +28  °С, humidity is 40-70%.

Switching the display illumination on

–  When  the  weather  station  is  battery 

powered,  press  the  button  (13)  “LIGHT/
SNOOZE”  to  switch  the  display  illumi-
nation  on,  the  illumination  will  go  out  in 
5  seconds.

Using the power adapter

–  Before  using  the  power  adapter  make 

sure  that  your  home  mains  voltage  cor-
responds  to  the  power  adapter  operat-
ing voltage.

–  Insert  the  power  adapter  cord  plug  (16) 

into  the  socket  (15),  plug  the  power 
adapter  in,  the  display  illumination  will 
light up.

Note: - when the main unit (1) is powered by 
the adapter (17), the batteries in the battery 
compartment switch off.

–  Place  the  main  unit  (1)  in  the  desired 

place. 

MAINTENANCE 

 •

Do  not  disassemble  the  unit  by  yourself, 
there are no parts inside the weather sta-
tion body which require replacement.

 •

Check the external sensor (18) batteries, 
if  the  symbol  (7)  “ ”  appears  on  the  dis-
play, replace the batteries.

 •

Use only new batteries, do not install new 
and old batteries together.

 •

Insert  the  batteries,  strictly  following  the 
polarity.

 •

After  changing  the  batteries  set  the  cur-
rent time on the main unit (1) and recon-
nect it with the external sensor (18).

 •

Clean  the  main  unit  (1)  body  and  the 
external  sensor  (18)  with  a  soft,  slightly 
damp cloth, and then wipe them dry.

 •

Do not use abrasives or solvents.

 •

Do  not  immers  the  main  unit  (1)  and  the 
external  sensor  (18)  into  water  or  any 
other liquids.

STORAGE

 •

If  you  are  not  going  to  use  the  weather 
station for a long time, it is recommended 
to remove the batteries from the main unit 
(1) and the external sensor (18).

 •

Keep  the  unit  in  a  dry  cool  place  out  of 
reach of children and disabled persons.

DELIVERY SET

Weather station – 1 pc.
External wired sensor – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Main unit

от -9,9  °C до + 50  °C  

(от 14,2°F до 122,0°F)

External sensor

from -35 °C to +60 °C 

(from -31,0°F to +140,0°F)

Temperature measurement precision

0.1 °C

Relative humidity measurement limits

from 20% to 95%

Relative humidity measurement precision

1%

IM VT-6411.indd   7

20.02.2018   10:20:45

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-6411?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"