Метеостанции VITEK VT-6411 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
5
walkie-talkies, games, computers and other
sources of interference may lead to tempo-
rary or permanent disturbances in receiving
signals by the main unit (1) , this does not
affect the main technical characteristics of
the unit, in some cases, the main unit (1) or
the external sensor (18) should be moved to
another location, free from the above said or
other obstacles preventing the passage of
signals from the sensor (18).
– When the external sensor (18) sends the
data, the indicator (21) lights up.
Main unit (1)
– Open the battery compartment lid (14)
and install 3 “AAA” batteries (not
included), strictly following the polarity,
you will hear a sound signal, then install
the battery compartment lid (14) back
to its place.
Note:
– after the batteries are installed, the main
unit (1) is mated to the external sensor
(18), and the reception indicator symbol
will be flashing, after the main unit (1) is
mated to the external sensor (18), the
reception indicator symbol will go out and
the outside temperature (7) will be shown
on the display.
– The time of mating of the main unit (1)
with the external sensor (18) depends on
the data transferring conditions from the
sensor (18) and the conditions of recep-
tion by the main unit (1) and it does not
exceed 3 minutes.
– To change a data reception channel on
the main unit (1) consequently press the
button (9) “UP”, the data reception chan-
nels “CH1, CH2, CH3”” (7) will change on
the display. Set the similar data recep-
tion channel on the external sensor (18),
to do this open the battery compartment
lid (19), remove the batteries and set the
data reception channel corresponding to
the data reception channel on the main
unit (1) with the tuner (22).
– To search for and mate the external sen-
sor (18) to the main unit (1) press and
hold the button (9) “UP” for 3 seconds,
the data reception symbol will light up and
flash on the display, after the main unit (1)
is mated to the external sensor (18), the
data reception symbol will go out and the
outside temperature (7) will be shown on
the display.
Current time and date setting
– Press and hold the button (8) “MODE”,
the digital symbols “year” (5) will be flash-
ing on the display (1).
– Press or press and hold the buttons (9,
10) “UP, DOWN” to set the current year,
press the button (8) “MODE” to confirm,
the digital symbols “month” (6) will be
flashing on the display.
– Press or press and hold the buttons (9,
10) “UP, DOWN” to set the current month,
press the button (8) “MODE” to confirm,
the digital symbols “day” (6) will be flash-
ing on the display.
– Press or press and hold the buttons (9,
10) “UP, DOWN” to set the current day,
press the button (8) “MODE” to confirm,
the time format digital symbols “24H or
12H” (5) will be flashing on the display.
– Press or press and hold the buttons
(9, 10) “UP, DOWN” to set the time for-
mat “24H or 12H”, press the button (8)
“MODE” to confirm, the current time digi-
tal symbols “hours” (5) will be flashing on
the display (1).
– Press or press and hold the buttons (9,
10) “UP, DOWN” to set the current time in
“hours”, press the button (8) “MODE” to
confirm, the digital symbols “minutes” (5)
will be flashing on the display.
– Press or press and hold the buttons (9,
10) “UP, DOWN” to set the current time in
“minutes”, press the button (8) “MODE”
to confirm, the current time is set.
Note: - if during setting of the current time no
setting buttons are pressed within 8 seconds,
the unit will switch to the default settings.
IM VT-6411.indd 5
20.02.2018 10:20:45
