Метеостанции VITEK VT-6407 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
ENGLISH
5
weather-resistant, it should be placed away
from direct sunlight, rain or snow.
The outdoor wired sensor is used when ambi-
ent temperature decreases below -9,9оС. In
this case remote sensor is located indoors,
and the outdoor wired sensor -outdoors.
Display illumination
Press the Light/Snooze button to switch
the illumination on. The illumination will be
switched off in about 7 seconds.
Date and time setting
Press and hold the MODE button for three
seconds to enter the setting mode. After that
you can select various settings by pressing
the MODE button:
1.
Current year/month/day setting.
2.
Month/day or day/month sequence selec-
tion.
3.
Selection of 12/24-hour time indication
format,
4.
Current time setting (hours/minutes).
5.
Exit setting modes.
•
Press and hold the MODE button for
three seconds to enter the setting mode.
The current year indication (2012 by
default) starts flashing, press the buttons
▼
/
▲
to set the intended value and press
the MODE button to confirm your setting.
•
Repeat the same procedure to set month,
day, day-month format, 12/24-hour time
indication format, hours and minutes.
Atmospheric pressure unit setting
By consequent pressing of the
▲
button
select atmospheric pressure units: millibar/
hectopascal (mb/hPa), Hg inches (inHg) or
Hg millimeters (mmHg).
Temperature units (°
С
/°F)
Use the
▼
button to select temperature mea-
suring units (°С/°F)
Temperature and humidity indication
By each pressing of MEMORY button following
parameters will be switched over:
•
Current temperature and humidity.
•
Minimal temperature and humidity.
•
Maximal temperature and humidity.
Symbolic weather forecast
The weather forecast is created according to
atmospheric pressure trends. According to
the collected data, the weather station can
forecast weather for the next 12-24 hours.
Notes:
To receive more precise weather
forecast you should enter your current
weather conditions at the initial start-up of
the unit.
Display
indica
tion
Temperature
range
Hu
midity
range
Notes
COM
20°C - 25°C
(68 °F - 77°F)
40% -
70%
Ideal
tempera-
ture and
humidity
range
WET
-5°C- +50°C
(23°F - 122°F)
More
than
70%
Relative
humidity
excess
DRY
-5°C - +50°C
(23°F - 122°F)
Less
than
40%
Low
humidity
No indi-
cation
Below 20°C
(68°F) or above
25°C (77°F)
40%-
70%
Display
symbol
Forecast
Sunny
Partly cloudy
Overcast
Rain
Lighting storm
Sleet
Snow
VT-6407_IM_18x14.indd 5
15.05.2013 14:19:36
