VITEK VT-3549 - Инструкция по эксплуатации - Страница 10

   ENGLISH

10

HOW TO SET THE RADIO CONTROLLED CLOCK

1.  After the batteries are installed. The clock will automatically search the radio signal. 

It takes about 3-5 minutes to finish this process.

2.  If user wishs to disable the auto-reception feature, holds the “Up” front panel for 2 

seconds to disable it.

3.  To enable the auto-reception feature again, holds the “Up” for 2 seconds again to 

force it receive and allow it receive at desired time.

4.  If the radio signal is received, the date & time will be set automatically with radio 

control signal icon [ ] turns on.

5.  If the clock fails to receive the time signal, it will be show as [ ] icon. Then user can 

set the time manually.

CALENDAR CLOCK DISPLAY MODES

The clock and the calendar share the same section of the display. The calendar is dis-
played in a day-month format.
Each press on the 

MODE 

button will change the display between clock with second, 

clock with day of week, zone time with day of week, zone time with second and day-
month.

HOW TO SET THE CLOCK MANUALLY

To set the clock manually, hold 

MODE 

for two seconds it will show the year. Use [-] or 

[+] to change it.
Press 

MODE 

to confirm. Repeat the same procedure to set display language, °C/°F, 

year, month, date, date-month format, 12/24, hour and minute.
During the setting, press and hold [-] or [+] will increase or decrease the value rapidly.
For display language, you can choose among English (En), German (DE), French (Fr), 
Italian (IT) and Spanish (SP) - in that order.
If there is an item you do not wish to change, simply press 

[MODE] 

to bypass the 

item.
When you finished the change, press 

[MODE] 

to exit.

The display will return to the clock mode.

HOW TO SET AND ARM THE ALARM

To set an alarm:
1.  Press [

ALARM

] once to display alarm time. If the alarm is disarmed, the time will be 

displayed as “OFF”.

2.  Hold [

ALARM

] for two seconds. The hour digits will blink.

3.  Enter the hour using [-] or [+].
4.  Press [

ALARM

]. The minute digits will blink.

5.  Enter the minutes using [-] or [+].
6.  Press [

ALARM

] to exit.

7.  Repeat the same procedure to set single alarm.

3549.indd   10

49.indd   10

02.06.2006   16:59:37

02.06.2006   16:59:37