Uniel UTV-64 - Инструкция по эксплуатации - Страница 14

• ALARM 

    In TIME display mode, touch [MODE] repeatedly until the “ALARM” icon appears to show the alarm time.

    To enable or disable the daily alarm, press [ALARM] repeatedly. Bell icon “  ” appears when alarm 

is enabled.

    Hold [ALARM] to enter alarm time setting mode. Press [+] or [-] to enter the desired Hr/ Min values 

and press [ALARM] to confirm setting.

• SNOOZE & BACKLIgHT

    When alarm is going off, press [SNOOZE/LIGHT] button on the top of the unit to trigger snooze alarm 

and the bell icon “  ” will flash indicating it is in the snooze mode. Press any other key to stop alarm for 

one day. 

Press [SNOOZE/LIGHT] for an extended backlight & projection

Press [LIGHT ON/OFF] to turn on or off the continuous backlight when adapter is connected

• LOW BATTERY INDICATION

Low battery indication is available for the home unit itself and all of the 3 remote channels. Replace the 

batteries and follow the setup procedure in this instruction manual.

• SPECIFICATIONS

Indoor Temperature:  

0 C to + 50 C (+32 F to +122 F)

Outdoor Temperature: 

-40 C to +60 C (-34 F to +140 F)

In/Out Humidity 

: 

20% - 99% RH

Radio frequency:   

433 MHz

Quantity remote sensors: 

max. 3

Channel:   

5

Transmission: 

up to 30M in open area, RF434 MHz

Temperature Resolution: 

0.1  C

Humidity Resolution: 

1 %

AC adaptor:  

~ 220 V / 50 Hz,     6 V * 200 mA

Backup batteries:   

1,5 V * 3 pcs. / АА

Remote sensor 

1,5 V x 2 pcs / AAA.