Uniel UTV-64 - Инструкция по эксплуатации - Страница 13

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

RU 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

RU 13

UTV 64

SUNNY                   PARTLY CLOUDY   

 CLOUDY  

    RAINY               STORMY 

                                                                                                                                        (Whole is flashing)

NOTE:

    Different geographical location such as inland area or coastal region has different weather forecast-

ing response. In case your weather forecast does not reflect the actual weather condi-tion over a long 

period of time, it is necessary to follow above setting procedure for fine tuning the weather forecast’s 

accuracy

• INDOOR / OUTDOOR TEMPERATURE  & HUMIDITY

    Press [NEXT>] to select indoor or outdoor display mode and the corresponding “INDOOR” or “OUT-

DOOR” icon will appear above the temperature readings. The humidity reading is highlighted in green 

on the right of the display. 

    If more than one channel (remote sensor) are registered, press [NEXT>] repeatedly to select the dif-

ferent channels in the “OUTDOOR” display mode.

   Press [oC/oF] button to select temperature unit degree oC/oF.

• INDOOR / OUTDOOR HEAT INDEX & DEW POINT

    Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the 

heat-humidity combination makes it feels.

    Dew point is the saturation point of the air, or the temperature to which the air has to be cooled in 

order to get condensation.

    In the “INDOOR” or “OUTDOOR” display mode, press [MODE] key to toggle between the tempera-

ture/humidity, heat index & dew point of the corresponding indoor or outdoor readings.

• MAXIMUM / MINIMUM MEMORY

    Press [MEM] button repeatedly to view the maximum, minimum & current values of temperature , 

humidity, heat index or dew point readings. To clear the memory record, hold [MEM] button while the 

respective values are displaying on screen.

• AUTO-SCROLLINg DISPLAY 

    Press [NEXT>] repeatedly until the “AUTO”, “ON / OFF” icons appear. 

    Press [MODE] to select Auto On or Off.

“AUTO OFF” 

Auto-scrolling display mode is disabled

“AUTO ON” 

Auto-scrolling display mode is enabled. Display will change between TIME, IN-    

          DOOR & OUTDOOR mode automatically and the “AUTO” icon will stay on the right of the display.

• CLOCK & CALENDAR

Press [NEXT>] to select TIME display mode and the “TIME” icon will appear above the clock.

Press [MODE] to toggle between clock, alarm time, calendar, year and day of the week.

Hold [CLOCK] button to enter clock setting mode. Using [+] or [-] to adjust and [CLOCK] to confirm, the 

following values can be set in sequence: 

12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > Weather Forecast > EXIT

TIPS: In any display mode, press [SNOOZE/LIGHT] will enter the time display mode directly.

• HOME TIME, WORLD (ZONE) TIME

Hold [ZONE] to enter world (zone) time setting mode. 

Press [+] or [-] to enter the desired hour offset value from –12 to +12 hours. Press [CLOCK] to confirm 

and exit. 

Press [ZONE] button to toggle between home time and world (zone) time.

“ZONE” icon appears when world (zone) time is selected. 

When zone time is not used, keep zone time to “0”.