Метеостанции Hama Color Edge 00136294 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
Manual settings
• Press and hold the
SET
button (20) for approximately 3 seconds to make the following settings one
after the other:
• Time zone (from -12 to +12 hours CET)
• Hour
• Minute
• Year
• Month
• Day
• Unit of atmospheric pressure (hPa or inHg)
• Press the
UP
button (19) or
DOWN
button (22) to select your setting. Press the
SET
button (20) to
confirm your entries.
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central
European Time in Germany. Make sure you account for the time difference in countries in other
time zones.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set
+3 for the time zone. The clock then sets the time automatically to 3 hours ahead after receiving
the DCF signal or according to the manually set time.
Alarm
• Press and hold the
ALARM
button (23) for approximately 3 seconds to set the time of the alarm
displayed. The hours display begins to flash.
• Press the
UP
button (19) or
DOWN
button (22) to select the hour for the alarm time and confirm
your selection by pressing the
ALARM
button (23).
• Repeat the process to set the minutes for the alarm time.
• Repeat the entire process to set the second alarm.
• Press the
ALARM
button (23) once to display the alarm time. Press the
ALARM
button (23) once
more to activate the alarm.
• Press the
ALARM
button (23) a third time to deactivate the alarm.
• If the alarm is triggered, the alarm symbol is displayed and an alarm will sound.
• Press
UP
(19),
DOWN
(22),
SET
(20) or ALARM to stop the alarm.
Note – Snooze function
• While the alarm signal is sounding, press the
SNOOZE
button (18) or
LIGHT
button (21) to
activate the snooze function. The icon begins to flash on the display. The alarm signal will stop
for approximately 10 minutes, after which it will sound again.
• Press
UP
(19),
DOWN
, (22),
SET
(20) or ALARM to stop the snooze function and the alarm.
Temperature (Celsius/Fahrenheit)
• Press the
UP
button (19) to switch between °C and °F for the temperature display.
• The weather station indicates a trend as to how the values for the indoor and outdoor temperature
are likely to develop over the next few hours.
Display
Trend
Increasing
Constant
Decreasing
