Метеостанции Ea2 BL501 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

ENGLISH 9
ENGLISH 10
8. Low battery indication:
The low battery icon “
” will appear at particular channel indicating that thermo sensor
unit of the channel is in low battery status. The battery should be replaced.
9. Backlight
Press “SNOOZE/LIGHT” button (B2), back light states for 5 seconds.
10. Precautions
• Use a pin to press the reset button (B9) if the Unit does not work properly.
• All Setting Modes will automatically exit in 15 seconds without any adjustment.
• The clock loses its time information when the battery is removed.
• Avoid placing the clock near interference sources/metal frames such as computer or
TV sets.
• The clock loses its time information when the battery is removed.
• Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
• The outdoor sensor must not be set up and installed under water. Set it up in away
direct sunlight and Rain
• Never clean the device using abrasive or corrosive materials or products. Abrasive
cleaning agents may scratch plastic parts and corrode electronic circuits
Indoor Data:
Temperature range:
-9.9°C to 50°C [14.2°F to 122°F]
Temperature Units Measured:
°C or °F [switchable]
Outdoor Data:
Transmission distance: (open area)
30m @ 433MHz
Temperature range:
-40 ~ 50°C [-40 ~ 122°F]
Mount:
wall / table
Main Unit Dimensions:
w80 x h158 x d19 mm
Thermo Sensor Dimensions:
w65 x h84 x d18 mm
Battery Requirements:
Base Station [indoor]:
3 x AAA batteries
Sensors [outdoor]:
2 x AAA batteries
11. Specifications