GIGABYTE GA MA770T UD3 rev 1 5 - Инструкция по эксплуатации - Страница 83

Appendix

- 83 -

Rebuilding an Array:

Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding
applies only to fault-tolerant arrays such as RAID 1 or RAID 10 arrays.  To replace the old drive, make

sure to use a new drive of equal or greater capacity. The procedures below assume a new drive is
added to replace a failed drive to rebuild a RAID 1 array.

While in the operating system, make sure the

chipset drivers

and 

ATi SB700/750 RAID Utility

 have

been installed from the motherboard driver disk. Then launch the 

AMD RAIDXpert

 from 

All Programs

in the 

Start Menu

.

Step 1:

Enter the login ID and password

(default:"admin"),

and then click 

Sign in

 to launch 

AMD RAIDXpert

.

Step 2:

Select the RAID array to be rebuilt under 

Logical

Drive View

 and click the 

Rebuild

 tab in the

Logical Drive Information

 pane.

Step 3:
Select one available drive and click 

Start Now

to start the rebuilding process.

Step 4:
The rebuilding progress is displayed on the
screen and you can select 

P a u s e / R e s u m e /

Abort/Restart

 during the rebuilding process.

Step 5:

When done, the array's status on the 

Information

 page

in the

 Logical Drive Information 

pane will display as

Functional

.