Материнские платы GIGABYTE GA 8I915G Duo - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GA-8I915G Duo Motherboard
- 44 -
English
Sports
Set C.I.A.2 to Sports. (Automatically increase CPU frequency(7%,9%) by CPU
loading.
Racing
Set C.I.A.2 to Racing. (Automatically increase CPU frequency(9%,11%) by
CPU loading.
Turbo
Set C.I.A.2 to Turbo. (Automatically increase CPU frequency(15%,17%) by CPU
loading.
Full Thrust
Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%,19%)
by CPU loading.
Warning: Stability is highly dependent on system components.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Disable CPU Host Clock Control. (Default value)
Enabled
Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
This item will be available when "CPU Host Clock Control" is set to Enabled.
100MHz ~ 600MHz
Set CPU Host Clock from 100MHz to 600MHz.
If you use FSB533 Pentium 4 processor, please set "CPU Host Frequency" to 133MHz.
If you use FSB800 Pentium 4 processor, please set "CPU Host Frequency" to 200MHz.
Incorrect using it may cause your system broken. For power End-User use only!
PCI-E Frequency to CPU
Auto
Set PCI Express frequency automatically. (Default value)
ASYC
Fix PCI Express frequency to 100Mhz.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533MHz,
2.5
Memory Frequency = Host clock X 2.5.
3
Memory Frequency = Host clock X 3.
4
Memory Frequency = Host clock X 4.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800MHz,
1.66
Memory Frequency = Host clock X 1.66.
2.00
Memory Frequency = Host clock X 2.
2.66
Memory Frequency = Host clock X 2.66.
3.00
(Note)
Memory Frequency = Host clock X 3.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on "Memory Frequency For" item.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage to the
memory may occur.
Normal
Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V
Set DIMM OverVoltage Control to +0.1V.
+0.2V
Set DIMM OverVoltage Control to +0.2V.
+0.3V
Set DIMM OverVoltage Control to +0.3V.
(Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB
processor and set
Memory Frequency For
to
3.00
.
