Материнские платы GIGABYTE GA 8I865GME 775 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GA-8I865GME-775 Motherboard
- 34 -
English
2-3
Integrated Peripherals
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
On-Chip SATA
Disabled
Disable onboard Seria ATA function.
Auto
When there is no device to be plugged in IDE1 or IDE2, SATA controller will
remap to IDE controller. (Default value)
Manual
Set SATA mode manually from "SATA Port0 configure as" item.
SATA Port0 configure as
IDE Pri. Master
Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Primary Master.
IDE Pri. Slave
Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Primary Slave.
IDE Sec. Master
Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Secondary Master.
IDE Sec. Slave
Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Secondary Slave.
SATA Port0
Set SATA controller to native mode(Serial ATA mode - SATA Port 0). This
mode is only supported by Windows XP or later. (Default value)
SATA Port1
Set SATA controller to native mode(Serial ATA mode - SATA Port 1). This
mode is only supported by Windows XP or later.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE
[Enabled]
On-Chip Secondary PCI IDE
[Enabled]
On-Chip SATA
[Auto]
x SATA Port0 configure as
SATA Port0
SATA Port1 configure as
SATA Port1
USB Controller
[Enabled]
USB 2.0 Controller
[Enabled]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
Legacy USB storage detect
[Enabled]
AC97 Audio
[Auto]
Onboard H/W LAN
[Enabled]
OnBoard LAN Boot ROM
[Disabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
x ECP Mode Use DMA
3
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Default
F7: Optimized Defaults
Item Help
Menu Level
`
