GIGABYTE GA 880GM D2H rev 1 x - Инструкция по эксплуатации - Страница 41

- 41 -

BIOS Setup

(Note)  This item is present only when you install a CPU that supports this feature.

  Virtualization

Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems. 

(Default: Disabled)

  AMD K8 Cool&Quiet control

Auto   

 Lets  the AMD  Cool'n'Quiet  driver  dynamically  adjust  the  CPU  clock  and  VID  to  re-
duce heat output from your computer and its power consumption. (Default)

Disabled   

Disables this function.

  CPU Unlock

 (Note)

Allows you to determine whether unlock hidden CPU cores. (Default: Disabled)

  CPU core Control

 (Note)

Allows you to determine whether to manually enable/disable CPU Core 1/2/3/4/5.

Auto   

 Lets  the  BIOS  to  enable  all  CPU  cores  (number  of  cores  available  depends  on  the 

CPU being used). (Default)

Manual   

Allows you to individually enable/disable CPU Core 1/2/3/4/5.

  CPU core 0

 (Note)

This setting is fixed. CPU Core 0 is always enabled.

  CPU core 1, 2/3/4/5

 (Note)

Enables or disables CPU Core 1/2/3/4/5. (Default: Enabled)

  Hard Disk Boot Priority

Specifies  the  sequence  of  loading  the  operating  system  from  the  installed  hard  drives.    Use  the  up  or 

down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or 

<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.

  EFI CD/DVD Boot Option

Set this item to 

EFI

 if you want to install the operating system to a hard drive larger than 2.2 TB. Make 

sure the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-
bit and Windows Server 2003 64-bit. 

Auto

 lets the BIOS automatically configure this setting depending 

on the hard drive you install. (Default: Auto)

  First/Second/Third Boot Device

Specifies  the  boot  order  from  the  available  devices.  Use  the  up  or  down  arrow  key  to  select  a  device 

and press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-
CDROM, USB-HDD, Legacy LAN, Disabled. 

  Password Check

Specifies  whether  a  password  is  required  every  time  the  system  boots,  or  only  when  you  enter  BIOS 
Setup. After configuring this item, set the password(s) under the 

Set Supervisor/User Password

 item in 

the BIOS Main Menu.

Setup   

A password is only required for entering the BIOS Setup program. (Default)

System    

A password is required for booting the system and for entering the BIOS Setup  

program.