GIGABYTE B760 - Инструкция по эксплуатации - Страница 31

- 31 -

20)  RST (Reset Jumper) 

The  reset  jumper  can  connect  to  the  reset  switch  on  the  chassis  front  panel.  Press  the  reset  switch  to 

restart the computer if the computer freezes and fails to perform a normal restart.

The reset jumper provides you with several functions to use. To remap the button to perform different 

tasks, please navigate to the "BIOS Setup" page of GIGABYTE's website and search for "RST_SW 

(MULTIKEY)" for more information.

RST

1

Pin No.

Definition

1

Reset

2

GND

21)  BAT (Battery)

The battery provides power to keep the values (such as BIOS configurations, date, and time information) 

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low 

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1.  Turn off your computer and unplug the power cord.

2.  Gently remove the battery from the battery holder and wait for one 

minute. (Or use a metal object like a screwdriver to touch the positive 

and negative terminals of the battery holder, making them short for 

5 seconds.) 

3.  Replace the battery.

4.  Plug in the power cord and restart your computer.

•

Always turn off your computer and unplug the power cord before replacing the battery.

•

Replace the battery with an equivalent one. Damage to your devices may occur if the battery is 

replaced with an incorrect model.

•

Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 

or uncertain about the battery model.

•

When installing the battery, note the orientation of the positive side (+) and the negative side (-) 

of the battery (the positive side should face up).

•

Used batteries must be handled in accordance with local environmental regulations.