Biostar H610 - Инструкция по эксплуатации - Страница 17

Chapter 2: Hardware installation | 17

H610MX-E｜H610MX｜H610MH-E｜H610MH｜H610MHP｜H610MHC｜H610MX2-E｜H610MH2｜H610MHP2

Install M.2 Anchor

1. Lock the M.2 Anchor into the motherboard hole which you use for type of M.2 SSD.

2. Insert the M.2 SSD into the M.2 socket.

3. Insert the pin on the M.2 Anchor into the hole on itself.

Install an Expansion Card

You can install your expansion card by following steps:

•   Read the related expansion card’s instruction document before install the expansion 

card into the computer.

•   Remove your computer’s chassis cover, screws and slot bracket from the computer.

•   Place a card in the expansion slot and press down on the card until it is completely 

seated in the slot.

•   Secure the card’s metal bracket to the chassis back panel with a screw. (This step is only 

for installing a VGA card.).

•   Replace your computer’s chassis cover.

•   Power on the computer, if necessary, change BIOS settings for the expansion card.

•   Install related driver for the expansion card.

Note

» 

»

Please be note that you will need to use M.2 type screwdriver if you want to install or uninstall the 

screw. It is recommended not to use a screwdriver that does not meet the specifications, otherwise 

the screw may be damaged.