Beurer FM90 - Инструкция по эксплуатации - Страница 20

20

Step 5: Set the intensity 

For the air pressure massage, the foot massager has three 

intensity levels (low, medium, high). Select your desired in-

tensity level using the intensity button  .
LED green = low intensity

LED blue = medium intensity

LED red = high intensity

Step 6: Switch the heat on/off 

The foot massager has an optional heat function. You can 

warm your feet during the massage by using the heat func-

tion.

• To switch on the heat function, press the heat button   

during the massage. The LED on the heat button begins 

to light up red. Press the heat button again to switch off 

the heat function. The LED on the heat button goes out. 

Step 7: Stop the foot massage

• If, during use, you experience an excessive or unpleas-

ant feeling of pressure, press the start/stop button to 

stop the treatment. To start the foot massager again, 

press the ON/OFF button  .

Step 8: Switch off the foot massager

• To switch off the foot massager, press the ON/OFF 

button   when the device is switched on. The LED on 

the ON/OFF button   goes out. 

10. Cleaning and maintenance

Cleaning the foot massager

 WARNING

• Unplug the foot massager each time before cleaning.

• Clean the foot massager using only the methods specified. Under no circumstances may 

liquid enter the foot massager or the accessories.

• Clean the foot massager with a slightly damp cloth. If it is very dirty, you can also moisten 

the cloth with a mild soapy solution.