Philips QC5053/00 - Инструкция по эксплуатации - Страница 9

  1 

 Slide the comb attachment into the guiding grooves of the 

appliance (‘click’).  (Fig. 5)

Make sure that the arms of the comb attachment have been properly slid 

into the grooves on both sides.

  2 

 Set the comb to the desired hair length (3, 6, 9, 12, 15, 18 or 21 

millimetres) by turning the length lock (Fig. 6).

  3 

 Switch on the appliance (Fig. 7).

tips

 - We advise you to star t clipping at the highest setting and to reduce 

the hair length in small steps until you reach the desired hair length.

 - If a lot of hair has accumulated in the comb, remove the comb 

attachment and blow and/or shake the hair from the comb. Removing 

the comb does not change the selected hair length setting.

 - Write down the hair length settings used to create a cer tain hairstyle 

as a reminder for future clipping sessions.

Clipping without comb attachment:

You can use the clipper without comb attachment to contour the 

neckline and the area around the ears.

 - Remove the comb attachment by pulling it off the appliance (Fig. 8).

Never pull at the flexible top of the comb attachment. Always pull at the 

bottom par t.

 - The comb attachment keeps the cutting unit at a cer tain distance 

from your head. This means that, if you use the clipper without the 

comb attachment, your hair will be cut off ver y close to the skin.

Cleaning

Clean the appliance ever y time you have used it.

Do not use abrasives, scourers or liquids such as alcohol, petrol or 

acetone to clean the appliance.

The appliance and the adapter may only be cleaned with the brush 

supplied.

  1 

 Switch off the appliance and unplug it before you clean it. 

English

9