Philips QC5053/00 - Инструкция по эксплуатации - Страница 10

  2 

 Remove the comb attachment by pulling it off the appliance (Fig. 8).

  3 

 Push the middle part of the cutting unit upwards with your thumb 

until it opens and then pull it off the appliance (Fig. 9).

Be careful that the cutting unit does not fall to the floor.

  4 

 Clean the cutting unit with the brush supplied (Fig. 10).

  5 

 Also clean the inside of the appliance with the brush 

supplied (Fig. 11).

  6 

 Place the lug of the cutting unit into the slot and push the unit back 

onto the appliance (‘click’) (Fig. 12).

This appliance does not need any lubrication.

Replacement

A worn or damaged cutting unit should only be replaced with an original 

Philips cutting unit.

  1 

 Push the middle part of the cutting unit upwards with your thumb 

until it opens and then pull it off the appliance (Fig. 9).

Be careful that the cutting unit does not fall to the floor.

  2 

 Place the lug of the new cutting unit into the slot and push the unit 

back onto the appliance (‘click’) (Fig. 12).

Environment (QC5050 only)

 - Do not throw away the appliance with the normal household waste 

at the end of its life, but hand it in at an official collection point for 

recycling. By doing this, you help to preser ve the 

environment (Fig. 13).

 - The built-in rechargeable batter y contains substances that may 

pollute the environment. Always remove the batter y before you 

discard and hand in the appliance at an official collection point. 

Dispose of the batter y at an official collection point for batteries. If 

you have trouble removing the batter y, you can also take the 

appliance to a Philips ser vice centre. The staff of this centre will 

English

10