Panasonic ER-GP21 - Инструкция по эксплуатации - Страница 8

8

English

Charging the clipper

• 

Make sure that the clipper is turned off.

1

1

Place the clipper on the AC 
adaptor.

2

2

Insert the power plug into a 
household outlet.

•

Charging is completed after approx. 
8 hours.

•

Check the charge indicator lamp (

) 

glows.

2

2

1

1

3

3

Disconnect the power plug after charging is 
completed.

(for safety and to reduce energy usage)

•

The charge indicator lamp (

) continues to glow after 

charging is complete. There is no indication to show that 
“charging is complete”.

Notes

• 

If there is crackling noise on radios or other devices while 
charging, charge the clipper using a different household outlet.

• 

When the appliance is not used for 6 months or more, the battery 
will weaken (leak battery fluid, etc.). Fully charge the battery 
once every 6 months.

• 

When charging the clipper for the first time or when it has not 
been in use for more than 6 months, the lamp on the main body 
may not glow for a few minutes, or the operating time may 
shorten. Please charge it for more than 16 hours in such cases.

• 

Recommended ambient temperature for charging is 0 – 35 °C. 
Battery performance may decrease outside of the recommended 
temperature.

• 

1 full charge will provide approximately 60 minutes of continuous 
operation.

• 

You can charge the battery before it is completely discharged. 
However, it is recommended to charge when the battery is 
completely discharged. The battery life depends strongly on 
factors such as how it is used and stored.

Using the clipper

• 

Make sure that the clipper is turned off.

• 

The appliance may not operate in an ambient temperature 
approximately 0 °C or lower.

1

1

Select the trimming heights indicated on the 
insides and sides of the attachments.

2

2

Slide the power switch on the main body to the 
“ ” position to turn on the clipper.

Removing and mounting the comb attachments

Mounting the attachment

(Example: in the case of 
3 mm) 
Slide the attachment until it 
clicks.

Removing the attachment

Remove the attachment by pressing 
with your thumb.

3mm

click

ER-GP21_CIS.indb   8

2016/02/01   15:38:22