Panasonic ER 1410 S520 - Инструкция по эксплуатации - Страница 2

2

English

Important

Before use

This clipper is designed for professional use to trim hair and 
beards. Charge it for 8 hours before use for the fist time in order to 
activate the built‑in rechargeable batteries. It can be operated on 
either an AC adaptor or rechargeable batteries. Read all 
instructions carefully before use.

Charging the clipper

Use the ER1420/ER1410 hair clipper with the RE5‑95 adaptor 
only.
Avoid charging the batteries at temperatures below 5 °C or 
above 35 °C.
Avoid charging the batteries in direct sunlight or near a radiating 
heat source.
The charge status (

) lamp may blink at an early stage when 

it is used for the first time or if it has not been used for 6 or more 
months even if it is fully charged. This is not a malfunction.
Even though the clipper may not be used for an extended period, 
charge every 6 months to preserve battery life.
The power cord cannot be replaced. If it is damaged, the AC 
adaptor should be discarded.

Using the clipper

Warning ‑ Keep the appliance dry.
The clipper may become warm during operation and/or charging. 
This is normal.
Check that the blades and the attachments are not damaged 
before use. Replace them if they are damaged.
You should not allow permanent wave lotion, hair restorer or hair 
spray to come into contact with the main body or the blades. 
Doing so may result in cracking, discoloring or corrosion.
You should not drop the clipper on the floor.
You should not knock the blades and the attachments against 
hard objects.
You should not trim the hair of a pet.





•

•

•

•

•

•



•

•

•

•

•

•

•

Cleaning the clipper

Clean the housing using only a cloth slightly dampened with 
water or a mild soap solution.
Never use a caustic solution.
Never submerge the clipper in water.

Storing the clipper

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given 
supervision or instruction concerning use of the appliance by a 
person responsible for their safety. Children should be supervised 
to ensure that they do not play with the appliance.
Never tamper with moving parts.
Avoid grabbing the clipper by the power cord, as it may become 
detached, causing damage or injury.
If the clipper is not working properly, have it inspected at an 
authorized service center.

Specifications

Power source: 230 V AC, 50 Hz
Motor voltage: 2.4 V DC
Charging time: 1 hour

Airborne Acoustical Noise:  64 (dB (A) re 1 pW) 

ER1410

71 (dB (A) re 1 pW) 

ER1420

READ ALL INSTRUCTIONS BEFORE USE.



•

•

•



•

•

•

•

ER1420_EU.indb   2

2007/12/11   16:22:47