Imetec 11497 - Инструкция по эксплуатации - Страница 31

25

EN

 NOTE:

 when used without the adjustable comb (6 or 7), 

the appliance will cut the hair extremely closely to the scalp.

•  To remove the adjustable comb (6 or 7), press the release buttons on 

the sides of the appliance (5) and slide the adjustable comb off the 

appliance. 

USING THE TURBO MODE BUTTON

The TURBO (4) mode button has two speed settings. Push the button 

up (sport mode) for a quick cut or for cutting very thick hair. Push the 

button down (normal mode) for cutting thinner hair.

MAINTENANCE AND STORAGE

WARNING! Always disconnect the 

appliance from mains power before 

cleaning or performing maintenance. 

Switch the appliance off and clean immediately after each use or if the 

cutting head is excessively fouled with hair or dirt.

•  Do not use powdered products, abrasive liquid products or solvents 

such as alcohol or petroleum-based products to clean the appliance.

•  Do not immerse the appliance in water or any other liquid as this will 

damage the appliance itself.

 WARNING! Before each use, lubricate 

generously along the entire length of the 

blades with the oil included with the 

appliance. At the end of every use clean 

the blades with the comb supplied and 

lubricate them again.