Imetec 11497 - Инструкция по эксплуатации - Страница 30

24

EN

USING THE ADJUSTABLE COMB (6 AND 7)

Fit the adjustable comb required (6 or 7) as follows:

•  Slide the adjustable comb (6 or 7) onto the locking grooves on the 

appliance and push until it clicks into place.

•  Make sure that the comb (6 or 7) is fastened securely in the locking 

grooves on both sides.

• 

When fitted with the adjustable comb (6 or 7), the appliance has 12 

different hair length settings:

ADJUSTABLE COMB (6): 3, 5, 7, 9, 11, 13 mm

ADJUSTABLE COMB (7): 15, 17, 19, 21, 23, 25 mm

•  To set the comb (6 or 7) to the required cutting length, push the 

adjustment button (8) and slide the comb into the required position.

•  Press the O/I button (3) to switch the appliance on. Always switch 

the appliance off when not in use.

TIPS

•  Start with the adjustable comb set to the longest cutting length and 

reduce the cutting length in gradual steps.

•  For the best results, use the appliance against the direction of hair 

growth.

•  As not all hair grows in the same direction, use the appliance 

upwards, downwards or sideways as needed.

•  If an excessive amount of hair builds up in the teeth of the adjustable 

comb (6 or 7), remove the comb from the appliance and remove the 

accumulated hair from the comb with the cleaning brush (10).

•  Note the cutting length setting used to achieve a particular styling 

effect as reference for future use.

USING THE APPLIANCE WITH THE ADJUSTABLE COMB (6 OR 7)

If required, the appliance may be used without the adjustable comb (6 

or 7) to cut hair very closely to the skin (1 mm) or to trim at the nape of 

the neck and around the ears.