HOTTEK HT-965-003 - Инструкция по эксплуатации - Страница 15

ENG

15

• 

Using  the  shorter  attachment  comb  cut  hair  to  taper  the  hair  down  to  the 

neckline.  Comb  the  hair  and  check  for  uneven  areas,  and  outline  of  sides 

and neckline as described previously. 

Warning!

The  hair  clipper  can  continuously  operate  for  10  minutes  maximum. You  can 

continue operation after a 10-minute break.

Blade oiling

• 

The blades should be oiled before and after every haircut. 

• 

Turn the appliance off using the On/Off switch (3). 

• 

Apply  one-two  drops  of  oils  at  the  blade’s  teeth  and  back  side  of  the  top 

blade and then switch the unit on and make sure it is running smoothly. 

• 

Unplug the appliance and remove surplus oil with a dry cloth. 

Cleaning and Maintenance

• 

Disconnect the device from power source.

• 

The blades should be cleaned from hair with brush supplied.

• 

Remove the blades and clean from hair remains.

• 

Wipe  the  body  of  the  hair  clipper  and  the  accessories  with  wet  cloth.  Dry 

the appliance.

• 

Do not use chemically active or abrasive detergents to clean the device.   

Storage

• 

To store the appliance, thoroughly clean it.

• 

Store the appliance in a dry cool place out of reach of children.

• 

Electrical equipment have to be stored in a dry place at ambient temperature 

no higher than plus 40 °C with a relative humidity of 70%, and the absence 

of dust, acid and other fumes in surrounding medium which affect adversely 

the materials of the electrical devices. 

Utilization

After the end of the service life do not discard the unit with household waste. 

Hand it at an official collection point for recycling. Doing it you will help protect 

the environment.
The manufacturer preserves the right to change the design and the specifica

-

tions of the unit without a preliminary notification.

Unit operating life is 2 years