VITEK WX-4001 MS - Инструкция по эксплуатации - Страница 8

ENGLISH

8

6.   Press the STOP / EJECT button to cancel the 

record mode.

Note: return to the cassette playback mode, 
rewind the cassette to the beginning to lis-
ten to the records made.

CONNECTING THE EARPHONES

Jack (3,5mm) (3) is intended to connect the ear-
phones  with  16-32  Ohm  resistance.  Playback 
from  the  built-in  speakers  will  switch  off  auto-
matically when the earphones are connected.  

AUX IN jack

To connect an external device use the AUX IN (2) 
jack.  Connect  an  external  device  using  the  au-
dio  cable  3,5  mm  Jack  -  3,5  mm  Jack  (not  sup-
plied). 

MAINTENANCE AND SAFETY MEASURES

Safety measures and general maintenance

-   Place the unit on the hard stable surface in a 

way that the unit is not declined. 

-   Do not subject the unit, the batteries, CD-

discs to moisture, rain, sand or extremely high 
temperature from heaters or direct sunlight.

-   Do not cover the unit during its operation. 

Allow 6 inches (15 cm) of free space between 
the ventilation openings and the neighbor 
surfaces for the unit not to heat up. 

-   Mechanical parts of the unit contain bearings 

with self lubricating; they do not need lubrica-
tion.

-   Use soft dry cloth to clean the unit. Do not use 

cleaners, which contain alcohol, ammonia, 
petroleum or abrasives, because they can 
damage the body of the unit.

CD-player and storage of CD-discs

-   Do not touch the lens of the CD-player!
-   At extreme temperatures difference of the 

environmental air condensation can appear 
on the lens of the CD-player.  It will become 
impossible to playback a disc. Do not try to 
clean the lens. Leave the unit in a warm room 
until the moisture evaporates.

-  Always close the CD-slot, to avoid getting of 

dust into the slot. To clean the disc slot, wipe 
it with a soft dry cloth.

-   To clean a CD-disc, wipe it along the direct 

line from the center to the edges with a soft 
lint-free cloth. Do not use cleaners, they can 

damage the disc.

-   Never write on a CD-disc and do not attach 

any stickers to it.

CLEANING OF THE RECORDING MECHA-
NISM

Magnetic heads of the cassette recorder, its 
capstan idlers and capstan axis require periodi-
cal cleaning. It is necessary to remove parts of 
metal oxides, which cause depletion of the tape 
and accumulate on the stated above parts of 
the cassette recorder; it makes the operation of 
the magnetic head worse. Switch off the unit, 
pressing the STOP/EJECT button, to open the 
cassette slot, and press the PLAY button. Clean 
the magnetic heads of the cassette recorder, its 
capstan idlers and capstan axis with a soft cloth 
or a cotton pad, dampened in isopropyl alcohol, 
or use a special substance for cleaning mag-
netic heads.

NOTE: never use metal objects during 
cleaning of magnetic heads. Provide that 
cleaning substances do not get into the cas-
sette slot.

CLEANING OF THE UNIT

•   To avoid fire or electric shock, unplug the 

unit before cleaning.

•   You can clean the surface of the unit using 

the cloth for dust removal. Be careful when 
cleaning plastic parts.

•   When the columns bodies become dirty, use 

a soft dry cloth for dust removal. Do not use 
wax or abrasive polishes to clean columns 
bodies.

•   When the front panel becomes dirty, use a 

soft cloth, slightly dampened in a weak soap 
solution. Never use abrasive substances or 
polishes, they can damage surface of the 
unit.

Be careful! Provide that water or other liq-
uids do not get inside the unit during clean-
ing.

TROUBLESHOOTING GUIDE

Improper usage is always the case of trouble. If 
you consider that there is something wrong with 
the unit, check possible causes in this table.
If you have not managed to solve the problem, 
apply to the nearest authorized service center.

4001Instruk_ital.indd   8

15.11.2011   14:09:00