VITEK VT-3950 GY - Инструкция по эксплуатации - Страница 6

ENGLISH

6

recorded in MP format, but there are cases, 
when the disc is not played back due to settings 
of the software that was used while recording 
the disc.

.  Select the disc playback mode, by setting 

the operating mode switch to CD/MP 
position.

2.  Open the disc slot by pressing the 

OPEN/CLOSE button. Put the disc into 
compartment and close the Set the disc and 
close the Set the disc and close the slot lid. 
Make sure that the disc is inserted properly 
– with its label down.

.  To playback press the 

►║

 button. To pause 

the playback, press this button once again.

.  To stop the playback, press the 

■

 button.

5.  In the playback mode you can move to the 

next or to the previous track, by pressing the 



 or 



 buttons correspondingly. 

Note: CD/MP playback will stop while opening 
the disc slot, while switching to the radio mode.

Selecting a track, moving to the next/previ-
ous track

While playback or stop the playback you can se-
lect the desired track using the 



 or 



 buttons.

To move to the next track press the 



 button 

once.
To move to the previous track press in the play-
back mode the 



 button.

Fast rewind/fast forward

Press and hold the 



 or 



 buttons to fast for-

ward or rewind correspondingly, sound will be 
reproduced brokenly.

Selecting a folder

To select a folder press and hold the +0/FOL+ 
or -0/FOL- buttons on the remote control for 
more than  seconds, folder numbers will be 
successively displayed on the LCD-display: 
F0

→

F02 etc. When the number of the desired 

folder appears on the LCD-display, release the 
button. 

Different playback modes

Repeat/random playback

Pressing successively the REPEAT/RANDOM 
button on the player or on the remote control, 
you can select one track repeat, the whole disc 
repeat, folder repeat or random playback

Note: In the programmed playback mode, folder 
repeat is absent.  

Programmed playback

You can program playback of tracks (max. 99) at 
the desired order.
.  When the playback of the disc is stopped, 

press the PROGRAM button once. Track 
number while programming “P-” will 
appear on the LCD-display. 

2.  Select the desired track, successively 

pressing the 



 or 



 buttons. Press the 

PROG button to store the selected track. 

.  Repeat steps  and 2 to program other 

tracks.

.  To playback the programmed tracks press 

the PLAY/PAUSE/USB button.

5.  To stop playback of tracks in the 

programmed order press the STOP button 
once. To cancel programmed playback 
press the STOP button once again.

Playback of МР3 files from the external de-
vice (USB/ SD/MMC)

In the disc playback mode press and hold the 
PLAY/PAUSE/USB button for more than ,5 
seconds, the CD/MP player will switch to the 
USB mode. The “- - -“ symbols will appear on 
the LCD-display. To switch to the discs playback 
mode press and hold this button for more than 
,5 seconds once again. 
To switch to the SD/MMC mode press and hold 
the STOP/SD button for more than ,5 seconds. 
The “- - -“ symbols will appear on the LCD-dis-
play. Press the PLAY button to start playback. 
While successful reading of the external device, 
track playback will start.  
Control buttons and actions sequence while 
operation with the external device are the same 
as those while operation with the disc.
Maximal number of folders is 500; maximal 
number of tracks is 999.

Note: 

This unit does not support playback from 

all HDD and some MP players, as well as play-
back of МР files with byte rate more than 256 
Kbit/sec from external devices.

Note:

 In case if you switched the CD/MP 

player from the USB mode to the SD/MMC 
mode and the external device is not connected 
or cannot be read, “no” will appear on the LCD-
display.

3950IM.indd   6

19.05.2008   14:58:32