Магнитолы VITEK VT-3629 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

воспроизведении фонограммы необходимо очистить от пыли и грязи
рабочие поверхности магнитной головки, тон-валов и прижимных
роликов. Для этого протрите их неворсистым тампоном, пропитанным
спиртом, или используйте чистящую кассету.
•
Прикосновение к магнитной головке металлическими предметами
недопустимо.
СХЕМА ПОДКЛЮЧЕНИЯ МАГНИТОЛЫ
СПЕЦИФИКАЦИЯ
Питание
DC 12 В, отрицательное
заземление
Выходная мощность
4 х 35 Вт
Магнитофон
Система воспроизведения
4 дорожки,
2 направления
Скорость ленты
4,75 см/с
Взвешенное значение детонации
0,3%
Взвешенное значение сигнал/шум
40 дБ
Радиоприемник
FM - диапазон
64 -108 МГц
AM - диапазон
522 - 1620 КГц
СРОК СЛУЖБЫ АВТОМАГНИТОЛЫ НЕ МЕНЕЕ 3-Х ЛЕТ
РУССКИЙ
12
on the frequency, to store the station into memory, press the desired preset station button
until beep sound is heard, this indicate that the station is stored in memory, to skip the cur-
rent station and continue seeking, press and release the Seek Button once more.
14. LOCAL / DX BUTTON
When the until is powered up, DX mode will be selected automatically. In some area where he
number of radio stations is high, it may be difficult to search a radio station under Seek or
AMS mode, under this condition, if Local mode is selected, the weak stations will be by
passed because the sensitivity of the radio is decreased, it will be easier to search the desire
station.
OTHER FUNCTIONS
15. CD INPUT/CD BUTTON
Accepts input from CD player, to use this feature, connect CD signal to the CD input jack
located at the rear of the unit, then press the CD button at the front panel. To cancel CD
mode, press Band button to select radio mode or Tape button to select cassette play mode.
16. DISPLAY BUTTON
Press this button to display clock, the clock will remain for about five seconds, then return to
previous display mode.
CLOCK ADJUSTMENT
Press Display button for more than 2 seconds, the LCD will flash, this shows that the clock is
under adjustment mode.
Under clock adjustment mode, press the manual tuning down button to adjust hour or the
manual tuning up button to adjust minute. After adjustment is completed, press Display but-
ton again to return to normal operation, or it will resume to normal automatically if no key is
pressed for about 8 seconds.
NOTE: The clock keeps working even though the ignition key is off.
BACKUP POWER CONNECTION
The violet cable of the main unit must be connected directly to the car battery (+) or to a (+)
point where +12V DC is always alive. Current drain of the backup circuit is very small that it
does not cause battery discharge problem even if the car is parked for a long period.
POWER ANTENNA ACTIVATOR
This is used when you have an automatic power antenna. When the unit is turned on the
antenna extends automatically, when the unit is turned off, the antenna retracts automati-
cally.
17. RESET BUTTON
If the unit operates abnormally or displays wrong letters on the LCD, press the reset button
for more than 2 seconds to reset the microprocessor. The Reset button is located behind the
detachable panel.
MAINTENANCE
For System
The following suggestions help you care for the product so that you can enjoy it for years.
1.
Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain
minerals that can corrode the electronic circuits.
2.
Keep the product away from dust and dirt, which can cause premature wear of pans.
3.
Handle the product gently and carefully. Dropping it can damage circuit boards and
cases, and can cause the product to work improperly.
4.
Wipe the product with a dampened cloth occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong detergents to clean the product.
5.
Use and store the product only in normal temperature environments.
5
ENGLISH
3629.qxd 28.10.03 15:12 Page 10