VITEK VT-3466 - Инструкция по эксплуатации - Страница 8

Магнитолы VITEK VT-3466 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 40
Загружаем инструкцию
background image

ENGLISH

 

8

CLEANING OF THE UNIT

•  To avoid fire or electric shock, unplug the unit before cleaning.
•  You can clean the surface of the unit using the cloth for dust removal. Be careful when cleaning 

plastic parts.

•  When the columns bodies become dirty, use a soft dry cloth for dust removal. Do not use wax or 

abrasive polishes to clean columns bodies.

•  When the front panel becomes dirty, use a soft cloth, slightly dampened in a weak soap solution. 

Never use abrasive substances or polishes, they can damage surface of the unit.

Be careful! Provide that water or other liquids do not get inside the unit during cleaning.

TROUBLESHOOTING GUIDE

Improper usage is always the case of trouble. If you consider that there is something wrong with the 
unit, check possible causes in this table.
If you have not managed to solve the problem, apply to the nearest authorized service center.

Problem

Possible cause

Solution

Radio

Noise while listening  to radio sta-
tions in FM or AM band

The station is not tuned

Tune the station

FM band: the antenna is not 
extended

Extend the antenna

АМ band: the unit is out of 
reception area

Try other location variants

The unit does not playback sta-
tions in  FM or AM band

The FUNCTION switch is not 
set o the Radio mode 

Set the FUNCTION  switch to 
the radio mode

Low volume level

Increase volume level 

Disc

Disc is not played back

The FUNCTION switch is not 
set to AUX(MP3)

Set the
FUNCTION switch to 
AUX(MP3)

Disc is absent or set improp-
erly

Check the disc, it should be 
placed with its label down

Some tracks cannot be played 
back

Disc is scratched or dirty

W ipe the disc with a soft cloth, 
do not use the damaged discs

Disc is in its place but tracks can-
not be played back  

Disc is placed improperly

Check the disc, it should be 
placed with its label down

Disc is scratched or dirty

W ipe the disc with a soft cloth, 
do not use the damaged discs

Improper disc format

Use discs with corresponding 
format

USB-device 

is not played backed

USB-playback mode is not 
selected

Select the USB-playback 
mode

USB-device is not inserted 
into the jack or there are no 
МР3
files on it

Check whether the  USB-de-
vice is inserted into the jack 
and that it contains  МР3 files

3466IM.indd   8

3466IM.indd   8

17.09.2010   11:04:22

17.09.2010   11:04:22

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-3466?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"