Telefunken TF-SRP3403B - Инструкция по эксплуатации - Страница 5

5

Instruction manual

5

repeatedly to select USB/SD mode.

•  Press the +10 button to skip forward 10 

tracks during playback.

•  Press FOLDER+/- buttons to choose the 

folder location on the USB/SD (not applicable in 

RANDOM PLAY mode).

•   Press NEXT to skip to next song, BACK 

to skip to a previous song.

•  Press PLAY/PAUSE to start or pause 

playback.

•  Press P-MODE button to choose among 

different playback modes: NORMAL PLAY -> 

REPEAT 1 -> REPEAT FOLDER -> REPEAT 

ALL -> RANDOM PLAY.

•  Press STOP to stop playback.

  It may take up to 60 seconds to open 

and verify a large USB drive/SD card with 

many files.

Never remove SD cards or USB devices 

from the unit during playback, always stop 

playback, then press FUNCTION button 

to switch to another mode (FM/BT/AUX) 

before removing USB/SD storage devices 

to prevent damage to your files and storage 

devices themselves.

General USB/SD notes

  According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 
consumption exceeding 500 mA is not 
recommended without supplementary power 
supply. Failure to use supplementary power for 
connected USB drives with power consumption 
exceeding this value as well as defective 
USB drives may cause mechanical or thermal 
changes of elements of this unit as well as 
failure of internal elements of the USB port. 
Such damages are not warrantee cases.

Warning: usage of external USB drives 

containing BIN files in the root directory may 
cause malfunction of the unit or damage to the 
software.

•  This unit is equipped with a USB socket 

that can accept and play MP3 files stored on 
standard USB flash (2.0 version)/SD cards up 
to 16 GB.

•  FAT and FAT32 file system is supported by 

this unit.

AUX jack

You can connect the audio output of an 

external device to this unit, to listen to the sound 
of that device through the speakers of this unit.

•  To connect an external audio device, 

please use a standard audio cable with 3.5-mm-
to-3.5 mm plugs (not included) to connect the 
headphone out or audio line-out of the external 
device to the AUX input socket of this unit.

•  Press FUNC button repeatedly to select 

AUX mode; AUX icon will be displayed.

•  Turn on the external device. You cannot 

control playback with the buttons of this unit 
except adjusting the volume.

Maintenance and care

Switch off the appliance, unplug from the 

power supply. The outside of the appliance can 
be cleaned with a slightly damp cloth.

Accessories

USB/SD radio player 

1 pc

AC adaptor 

1 pc

Instruction manual   

1 pc

Warranty card 

1 pc

Consumer information 

1 pc