Telefunken TF-CSRP3434 - Инструкция по эксплуатации - Страница 5

5

Instruction manual

5

back to previous track. Press and hold this 
button to search for a particular point at high 
speed backward. Release the button to resume 
normal playback.

•  If you use an MP3 disc containing folders, 

you can select a folder. In stop mode, press 
repeatedly FOLDER button. The number of 
the current folder will be displayed. After you 
selected a folder you can select tracks in the 
current folder as described above.

Repeat mode

•  Press MODE button once for single track 

repeat playing. REP will be displayed.

•  If you use an MP3 disc containing folders, 

press this button again to repeat all tracks in 
the current folder. The track number and folder 
number will be shown every few seconds 
alternatively.

•  Press MODE button again for all track 

repeat playing.

•  Press MODE button again for all track 

random playing. RANDOM will be displayed.

•  To cancel repeat or random playback, 

press MODE button again.

Program mode

Up to 20 tracks can be programmed for disc 

play in any order or the same track can be 
repeated up to 20 times.

•  Before use, be sure to stop the CD by 

pressing STOP button.

•  Press PROGRAM button. The display will 

show “P01” and “PROGRAM”. This indicates 
that the set is now in memory programming 
mode, at the first memory position.

•  If you use an MP3 disc, press FOLDER 

button to select a folder.

•  Select a desired track by using 

 SKIP/

SEARCH and 

 SKIP/SEARCH buttons.

•  Press PROGRAM button again to confirm. 

The set will advance to next memory position, 
the display will show “P02”. Repeat two steps 
described above to enter additional memories 
into the program if necessary.

•  After the maximum of 20 songs (or less) 

have been selected as described above, 

press PLAY/PAUSE button to start playing the 
programmed tracks.

•  The “PROGRAM” symbol will remain on 

to indicate that you have saved a program-
memory (sequence).

•  To check the program you stored, after 

the programming is completed, in stop mode 
press PROGRAM button (for MP3 discs - after 
PROGRAM button press FOLDER button 
to see the folder number), then press 

SKIP/SEARCH button repeatedly to see all 
programmed track numbers.

•  The program memory will be cleared when 

you press STOP button twice, open the disc 
compartment door or turn off the disc player or 
power supply.

  Good quality sound is guaranteed only 

when playing licensed MP3 discs.

USB/SD/MMC-card playback

•  This unit is equipped with a USB socket 

that can accept and play MP3 files stored on 
standard USB flash (compatible with USB 
version 2.0) up to 8 Gb.

•  This unit is also equipped with an SD/

MMC card socket that can accept and play 
MP3 files stored on standard SD cards up to 
32 Gb.

•  To use USB drives/SD/MMC cards for 

MP3 playback, slide the function switch to CD 
position. Insert the USB drive or SD/MMC card 
into the appropriate socket and repeatedly 
press CD/SD/USB button until the display 
shows “USB” or “CARD” (depending on which 
one is being used).

•  All operations with files contained in USB/

SD/MMC are the same as operations with MP3 
discs.

  Always switch off the unit or change 

mode to CD before removing a USB flash drive 
or SD/MMC card, to prevent damage to your 
USB device or memory card.

Note:

 Although this product is fully 

compatible with USB 2.0 and SD/MMC card 
standard formats, a small percentage of USB 
flash drives and SD/MMC cards might not be 
readable, due to those device manufacturers