Магнитолы Soundmax SM-CMD3016 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
15
between the left and right speakers. Fader is to adjust the balance between the rear and front speakers. After
you have reached your desired effect, leave the unit idle in order for the new setting to take effect.
Note: If the equalizer is set on, bass and treble are not adjustable.
EQ modes
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows EQ OFF. Press
VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to choose an equalizer effect: POP
=> ROCK => CLASS => FLAT => EQ OFF. After you have reached your desired effect, leave the unit idle in
order for the new setting to take effect.
Loudness
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOUD ON
(LOUD OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between
LOUD ON/LOUD OFF. LOUD function is to emphasize the bass output; the word LOUD ON indicates that the
LOUD mode is on.
Clock setting
Press CLK button on the panel to show the time on the display. Press and hold it, the hour will be in green.
Rotate VOLUME regulator on the panel or press VOL+/VOL- buttons on the RC to adjust the hour. Press SEL
button on the RC or SELECT button on the panel, the minute will be in green. Rotate VOLUME regulator on
the panel or press VOL+/VOL- buttons on the RC to adjust minutes. Press CLK button to confirm.
Beep
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows BEEP ON (BEEP
OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between BEEP
ON (beep sound will be heard when buttons are pressed) and BEEP OFF. After you have reached your desired
effect, leave the unit idle in order for the new setting to take effect.
Button backlight color
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows COLOR1
(COLOR2). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between
