Магнитолы Soundmax SM-CMD3008 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19
STEREO button on the RC to switch stereo reception on/off. Improvement of reception of distant stations
can be done by selecting mono mode, which may cut down some reception noise.
Local radio station search
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOC ON (LOC
OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOC
ON/OFF. LOC ON means that only local stations are received; LOC OFF means that both local and distant
stations with weak and strong signal are received. Or press LOCAL button on the RC to switch between local
and distant station reception.
RDS function
RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not
available in you area, the following service is not available, either.
AF (Alternative Frequencies) function
Press AF button on the panel to turn the AF function on or off. When the function is on, AF symbol will blink
on the display.
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search
another station with the same PI (Program Identification) as the current station but with a stronger signal,
so that you do not have to retune the stations when driving between different transmitter coverage areas.
PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode.
TA (Traffic Alarm) function
Press TA button to turn TA function on or off. When on, the TA symbol will show on the display.
In TA mode traffic program will be automatically searched, until the program is received. When traffic
announcement is received the unit will temporarily switch to the tuner mode (regardless of the current
mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to
the previous mode and volume level. To interrupt traffic announcement press TA button shortly; it will not
switch off the TA mode.
