Soundmax SM-CMD3006 - Инструкция по эксплуатации - Страница 16

16

General operation

Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the RESET button on the panel to restore the unit to the original factory settings.
Power on/off

Press PWR/MU button on the panel or PWR button on the RC to turn the unit on. Long press the PWR/MU
button on the front panel or briefly press the PWR button on the RC to turn the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you
turn the unit on it will resume the stored status which you set.

Volume control
Rotate the VOL knob on the panel or press the +/ – buttons on the RC to adjust the volume level.
Mute function
Press the PWR/MU button on the panel or MU button on the RC to mute volume control. Press MU, EJECT,
VOL, SEL, PWR, MODE or +/- buttons to resume the volume.

Setting the sound characteristics
Press  the  SEL  button  to  select  the  mode:  =>  VOL  =>  BAS  =>  TRE  =>  BAL  =>  FAD  =>.  Press  the  +/-
buttons on the RC or rotating the VOL knob to adjust each mode.
Note:

If turning off the power all the settings of each mode will be saved.
If turning off the ACC power all the settings will become as they were set on the plant as current.

Mode control
Press the MOD button on the panel or MODE button on the RC to select the different playing modes: =>

TUNER => DISC (the type of disc in the unit if there is any) => USB (if the USB device is inserted) =>
CARD (if the SD/ MMC card is inserted) => AUX => TV =>.
Clock setting
1.  Press the CLK button on the RC to show the clock on the display.
2.  Press and hold for 2 seconds the CLK button, the hour will change its color.

3.  Press the +/- buttons on RC or rotate the VOL knob on the panel to adjust the hour.
4.  Press briefly the SEL button again, the minute will change its color.
5.  Press the +/- buttons on RC or rotate the VOL knob on the panel to adjust minutes.