Магнитолы Soundmax SM-CMD2023 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
Press APS button to scan all preset stations in the memory of the current band and stay on each memory station
about 5 seconds. To stop preset scan, press this button again. To listen to the saved station press 1-6 buttons.
TA SEEK/TA ALARM
To choose the TA mode, press VOLUME knob for 2 seconds, then press it repeatedly until the display shows TA seek.
Rotate VOLUME knob to choose between the TA SEEK and TA ALARM. After choosing, please leave the unit idle to
activate. In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM
mode, no TA/TP is displayed and the alarm is set off.
MASK DPI/MASK ALL
Press VOLUME knob for 2 seconds, then press it repeatedly until the display shows MASK DPI. Rotate the VOLUME
knob to choose between MASK DPI and MASK ALL mode, then leave the unit idle to activate. During MASK DPI
mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK ALL mode, the
unit will mask the AF which has different PI and no RDS signal with high field strength.
RETUNE S/L - SHORT/LONG
Press VOLUME knob for 2 seconds, then press it repeatedly until the display shows “RETUNE”. It refers to the time
period the unit allows for radio scan when reception is interrupted. Rotate the VOLUME knob to choose between 'S'
represents a time period of 30 seconds and 'L' represents a time period of 90 seconds.
RDS function
RDS function
RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in
you area, the following service is not available, either.
Press TA button to activate the reception of traffic announcements.
The radio allows to select the type of program required, and searches for the station broadcasting that type of
program. Press PTY/CLK button once to show the music type. Then press 1-6 button to choose the different
music types available. Press PTY/CLK button twice to show the speech type program. Then press 1-6 button to
choose the different speech type program. Each number key will show 3 different speech program for you to
choose.
