Soundmax SM-CCR3704 - Инструкция по эксплуатации - Страница 6

6 

Mounting 

•   Connect the cable set and the antenna to the vehicle’s electronics corresponding to the connection table 

(see farther). 

•   Attach the mounting racks to the sides and to the back of the unit, and fix them with the screws. 

•   Insert the unit into the slot until the stop. The unit then audibly snaps. 
•   Fasten the screws to fix the unit. 
•   The device is distinguished by a high degree of output. During operation, this results in a strong heat 

generation. Therefore no cables or other parts may adjoin the device. If their insulation melts, there is the 
risk of a short circuit or fire. 
   •     Removing: Turn off the device. Clamp off the  negative pole of the  vehicle battery for the duration of the 
disassembly. Unscrew the four screws. Remove  carefully  the  unit  from the  slot  and disconnect  all  wires. Make 
sure that no vehicle cable can cause a short circuit after the device has been unplugged.